CGMP

24/12/2024 9 min read

Cosmetic raw material quality management: receipt to dispensing

The quality of a cosmetic batch starts with its raw materials. This article goes through each control point, from the moment a delivery reaches the factory gate to when the raw material is weighed into the mixing tank.

Cosmetic raw material quality management: receipt to dispensing
Sensory testing of samples in the formulation laboratory

Cosmetic raw material quality management is the chain of controls from the moment a delivery reaches the factory gate until the raw material is weighed into the mixing tank: receipt, quarantine, sampling, testing, the decision to accept or reject, storage, dispensing and record keeping.

This article quotes Vietnamese law and CGMP-ASEAN verbatim and states clearly which parts are common practice; packaging is discussed in the article cosmetic packaging control (in Vietnamese).

1. Legal basis and GMP guidelines

Document, provisionVerbatim text
Decree 93/2016/ND-CP (in Vietnamese) on cosmetic manufacturing conditions, Article 4, Clause 3, point a (as amended by Article 13 of Decree 155/2018/ND-CP (in Vietnamese) on investment and business conditions under the Ministry of Health)"Raw materials, auxiliary materials and semi-finished products used in cosmetic manufacturing must meet the manufacturer's quality specifications."
Decree 93/2016/ND-CP, Article 4, Clause 3, point dd"Have a quality control unit to check the quality of raw materials, semi-finished products, bulk products awaiting packaging and finished products;"
Decree 90/2026/ND-CP (in Vietnamese) on administrative penalties in the health sector, Article 69, Clause 1, point cA fine of VND 30,000,000 to VND 40,000,000 (the level for individuals; double for organizations) for the violation "Using raw materials that have expired or do not meet quality specifications in cosmetic manufacturing;"
Appendix VI of the ASEAN Cosmetic Directive (CGMP-ASEAN), section 6.4.1"All starting materials used should be approved according to specifications."
Circular 06/2011/TT-BYT on cosmetic product management, Appendix 07-MP (in Vietnamese), Part 2The PIF includes "Quality specifications and test methods of the raw materials." and raw material safety data

2. Raw material specifications: the starting point

Appendix VI requires that "All specifications should be approved by authorised personnel." and states that specifications for raw and packaging materials should include (section 8.2.1): (a) name of the material; (b) description; (c) test parameters and acceptance limits; (d) technical drawing, where needed; (e) special notes such as storage conditions and safety, if needed.

Which parameters to include is up to each factory; the table below is a common-practice example:

Raw material groupParameters commonly included in the specification
All raw materialsOrganoleptic properties (physical state, color, odor), identification or identity parameters, check against the CoA
Oils, esters, waxesCharacteristic physicochemical parameters such as specific gravity, refractive index, melting point, acid value
Water-based raw materials, liquid extracts, polymers and powders of natural originAdditional microbiological parameters
Mineral powders, pigmentsHeavy metals, so that the finished product meets the limits of 1 ppm mercury, 5 ppm arsenic and 20 ppm lead in Appendix 06-MP (in Vietnamese) to Circular 06/2011/TT-BYT
Substances with concentration limits (preservatives, UV filters…)Assay or purity, so that the concentration in the formula is calculated correctly

The limits in Appendix 06-MP apply to the product, not to individual raw materials; setting parameters at the raw material level is control at the source. Impurity information is usually obtained from the supplier; see the article supplier evaluation.

3. Receipt and quarantine

Appendix VI requires on receipt: "Upon receipt, each incoming delivery should be checked against the relevant documentation and physically verified by label description, type and quantity." (section 10.2.1.1); deliveries are examined for defects and damage, with a record kept for each delivery (10.2.1.2); goods must be clean, with packaging free of leaks, punctures or openings (6.1.2).

Receiving checklist (practice):

  • The supplier and the original manufacturer are on the approved list for this raw material.
  • Name, code and lot number on the label match the delivery note and the CoA; remaining shelf life is sufficient under internal rules.
  • Seals intact and transport conditions as required; the outside of containers is cleaned before entering the warehouse where necessary (section 10.1.3).
  • An internal lot number is assigned while the original lot number is still recorded, for two-way traceability.

The goods are then placed in quarantine. Appendix VI defines quarantine as "The status of materials or products set apart physically or by system, while awaiting a decision for their rejection or release for processing, packaging or distribution." (section 14.17) and requires that the quarantine area "should be clearly demarcated" (section 10.1.4). If quarantine is "by system", the warehouse management software must actually be able to block the issue of goods that have not been accepted.

4. Sampling and testing

  • Sampling area: "Wherever possible sampling area for starting materials should be provided to prevent contamination." (Appendix VI, section 10.1.5).
  • Representative samples: the FDA draft guidance (2013, non-binding, for reference only) recommends "Samples are representative of the lot". The sampling SOP specifies the number of containers to be sampled, clean tools and how containers are resealed; the documents reviewed do not set a number of samples for cosmetics.
  • Testing before use: "Samples of raw materials should be physically checked for conformity to specifications prior to release for use." (section 6.1.2).
  • Reliance on the CoA: common practice is to test every lot for organoleptic properties and identity, while the remaining parameters may rely on the CoA when the supplier has been approved and periodic verification testing is in place; the extent of reduction must be written into the SOP.
  • External laboratories: when outsourcing, choose a laboratory accredited to ISO/IEC 17025 (common practice) and have a written contract under section 11 of Appendix VI.

For water, Article 4, Clause 3, point b of Decree 93/2016/ND-CP requires that "Water used in cosmetic manufacturing must at least meet the national technical regulation on drinking water issued by the Minister of Health;" and section 6.1.1 of Appendix VI requires periodic monitoring of the chemical and microbiological quality of water.

5. Decision to accept or reject

Under section 2.1.3 of Appendix VI, the head of quality control has the authority to designate the persons who accept raw materials that meet specifications or reject those that do not. The outcome is one of two statuses defined in Appendix VI: "Released" — permitted for use in processing, packaging or distribution (section 14.20); "Rejected" — not permitted for use (section 14.19).

For non-conforming goods: "Deliveries of raw materials that do not comply with specification should be segregated and disposed according to standard operating procedures." (section 6.1.3). In practice: apply a "non-conforming" label, move the goods to a separate area, notify the supplier, and record the disposition (return or destruction).

Raw material quality control records (section 8.3.3 of Appendix VI) may include: test date, material identification, supplier, date of receipt, original batch number (if any), batch number, quality control number, quantity received, sampling date and results.

6. Storage and dispensing

  • Storage conditions: "Where special storage conditions are required (temperature and humidity) these should be provided, checked and monitored." (section 10.1.2).
  • Separate areas: Article 4, Clause 2, point b of Decree 93/2016/ND-CP requires warehouses that keep raw materials, packaging materials and finished products separate and that "have separate areas for storing flammable and explosive substances, highly toxic substances, and rejected, recalled and returned raw materials, packaging materials and products."
  • Issue order: "Issues should observe the principle of stock rotation (first in - first out)." (section 10.2.2.2). When lots have different expiry dates, many factories apply first expired, first out (FEFO) — common practice.
  • Expiry: using expired raw materials is a violation subject to penalties under Article 69, Clause 1, point c of Decree 90/2026/ND-CP; the warehouse system should automatically block expired lots.
  • Weighing: weigh in a designated area with calibrated equipment; "All weighing and measurement carried out should be recorded and, where applicable, counterchecked." (section 6.3.2). The lot numbers of the weighed raw materials are recorded in the batch manufacturing record.

7. Records, traceability and retention period

Section 6.1.2 of Appendix VI requires raw materials to "be traceable to the product". When goods receipt notes, test reports, weighing slips and batch records share the same lot numbers, the factory can trace in both directions between raw material lots and finished product batches — see the article retained samples and batch traceability (in Vietnamese).

Neither Appendix VI nor Decree 93/2016/ND-CP sets a number of years for keeping raw material records. The closest legal reference point is Article 48, Clause 4 of Circular 06/2011/TT-BYT: the organization placing the product on the market "must keep the Product Information File (PIF) for at least 3 years from the date the last batch was placed on the market". Because raw material specifications and test methods are part of the PIF, a reasonable common practice is to keep raw material records for at least as long as the related finished product batch records; the specific period is stated in the SOP and the contract manufacturing agreement.

At Butter-C, every finished product batch has a batch record, is tested at a GLP / ISO 17025-accredited laboratory and has samples retained before handover, in line with step 8 of the contract manufacturing process.

Frequently asked questions

If a raw material has a passing CoA, does it still need incoming testing?

Yes. Appendix VI requires samples to be checked before release for use; the extent of testing may be reduced under the SOP once the supplier has been approved, but organoleptic and identity testing of every lot is common practice.

Can an expired raw material be used if it passes retesting?

No. Article 69 of Decree 90/2026/ND-CP penalizes the use of expired raw materials. The expiry date should be distinguished from the retest date that some raw material manufacturers assign instead of an expiry date.

How long should raw material records be kept?

GMP documents do not set a number of years; keep them at least as long as the related finished product batch records and the PIF retention obligation of at least 3 years from the last batch.

References

  1. ASEAN Cosmetic Directive (ACD), Appendix VI — ASEAN Guidelines for Cosmetic Good Manufacturing Practice. ASEAN Cosmetic Committee. PDF.
  2. Chính phủ. Nghị định 93/2016/NĐ-CP ngày 01/07/2016 quy định về điều kiện sản xuất mỹ phẩm. [Government of Vietnam. Decree 93/2016/ND-CP of 1 July 2016 on cosmetic manufacturing conditions.]
  3. Chính phủ. Nghị định 155/2018/NĐ-CP ngày 12/11/2018 sửa đổi, bổ sung một số quy định liên quan đến điều kiện đầu tư kinh doanh thuộc phạm vi quản lý nhà nước của Bộ Y tế. [Government of Vietnam. Decree 155/2018/ND-CP of 12 November 2018 amending and supplementing certain regulations on investment and business conditions within the state management scope of the Ministry of Health.]
  4. Bộ Y tế. Thông tư 06/2011/TT-BYT ngày 25/01/2011 quy định về quản lý mỹ phẩm. [Ministry of Health. Circular 06/2011/TT-BYT of 25 January 2011 on cosmetic product management.]
  5. Chính phủ. Nghị định 90/2026/NĐ-CP ngày 30/03/2026 quy định xử phạt vi phạm hành chính trong lĩnh vực y tế. [Government of Vietnam. Decree 90/2026/ND-CP of 30 March 2026 on penalties for administrative violations in the health sector.]
  6. U.S. FDA (2013). Draft Guidance for Industry: Cosmetic Good Manufacturing Practices. Guidance page.

Get started

Talk to us about the product you plan to launch

Please send us your product direction and expected quantities. Our team will get back to you during business hours.

Công ty cổ phần Dược mỹ phẩm Butter-C · Business registration no. 0108681386 (Hanoi Department of Planning and Investment, 03/04/2019)
Head office: Huu Le village, Dai Thanh commune, Hanoi · Factory: Thanh Oai Industrial Cluster, Binh Minh commune, Hanoi, Vietnam
Hotline 0967 176 511 · [email protected] · privacy policy
Product catalog →