Cosmetic ingredients

19/11/2026 9 min read

Polyglyceryl-2 Dipolyhydroxystearate: a W/O cream emulsifier

Polyglyceryl-2 dipolyhydroxystearate may be found in mineral sunscreens, diaper-area creams and rich water-in-oil (W/O) moisturizing creams. It is often presented as “PEG-free, plant-based, good at dispersing mineral powders”, but published data measured specifically for it are scarce; this article clearly separates what has been measured, what is formulation experience and what has not been verified.

Polyglyceryl-2 Dipolyhydroxystearate: a W/O cream emulsifier
Close-up of glossy, thick white streaks (the original Pexels photo shows white paint) — illustrating the dense texture of a water-in-oil emulsion cream, not a product photo

Polyglyceryl-2 dipolyhydroxystearate (INCI: Polyglyceryl-2 Dipolyhydroxystearate) is an emulsifier used to make water-in-oil (W/O) emulsions, in which water droplets are dispersed in a continuous oil phase. According to PubChem (ChemIDplus data), it is an ester of polyglycerin with a polymer of 12-hydroxystearic acid, CAS 144470-58-6. Published data measured specifically for this ingredient are scarce — limited evidence.

1. What is polyglyceryl-2 dipolyhydroxystearate?

PubChem gives the chemical name “Octadecanoic acid, 12-hydroxy-, homopolymer, ester with 1,2,3-propanetriol homopolymer”: the hydrophobic part is a polymer of 12-hydroxystearic acid (polyhydroxystearic acid), and the hydrophilic part is a polymer of glycerin. Because it is a polymer, this ingredient has no defined molecular formula or molecular weight. Zhu et al. (2026) describe the molecule as consisting of a small polyglyceryl-2 hydrophilic head and relatively rigid hydrophobic tails.

12-hydroxystearic acid is the main fatty acid of hydrogenated castor oil (Shaw, 2009). This is not enough to label a specific lot of the ingredient as “plant-based”: that claim requires documentation from the supplier on the source of the starting materials.

Some INCI names that look similar are different substances, and their data are not interchangeable:

INCIDifference
Polyhydroxystearic AcidOnly the hydrophobic part, with no polyglycerin; used on its own as a powder dispersant, and has its own CIR assessment (section 6)
PEG-30 DipolyhydroxystearateA W/O emulsifying polymer with polyethylene glycol (PEG) segments. Most PubMed records containing the word “dipolyhydroxystearate” are about this substance, not the ingredient in this article
Polyglyceryl-3 Polyricinoleate, Polyglyceryl-6 PolyricinoleatePolyglyceryl esters of a ricinoleic acid polymer; compared directly with the ingredient in this article in the study by Zhu (2026)

2. Role in formulations

CIR notes that most polyglyceryl fatty acid esters are reported to function as skin-conditioning agents and/or surfactants (Fiume et al., 2023). For Polyglyceryl-2 Dipolyhydroxystearate, the role described in the literature is that of a polyglycerol-based W/O emulsifier (Zhu 2026).

  • W/O emulsification: the ingredient is dissolved in the oil phase; the water phase is added slowly to the oil phase under stirring, followed by homogenization. In Zhu's study, the water phase was added while stirring at 800 rpm for 10 minutes at room temperature, then homogenized at 10,000 rpm for 3 minutes.
  • Mineral powders: used on its own, polyhydroxystearic acid is an oil-soluble dispersant widely used for metal oxide particles in cosmetics (Fukuhara 2025), and CIR lists its function as “dispersing agent – nonsurfactant” (Raj 2026). The statement “polyglyceryl-2 dipolyhydroxystearate helps disperse zinc oxide well” is therefore an inference from its structure and formulation experience; we have not seen a published study measuring this specifically.
  • HLB: we did not find an HLB value for this ingredient in the PubMed/PMC sources we read. A figure in a supplier's technical documents is the supplier's description, and its source should be stated when quoted.

3. Evidence: mainly formulation experiments

An exact-name search for “polyglyceryl-2 dipolyhydroxystearate” on PubMed (November 19, 2026) returned only 1 record; a full-text search on PMC returned 11 articles, most of which only list this ingredient in a formula. We found no human trials measuring the effect of this ingredient on its own.

StudyModelRelevant results
Zhu et al., 2026Water-in-oil-in-water (W/O/W) double-emulsion liquid foundation containing titanium dioxide and iron oxides; 4 polyglycerol-based W/O emulsifiers compared, each at 1.5% of the formula; monitored for 30 days at −15, 25 and 45 °C, with centrifugation and rheology measurementsThe sample with the ingredient in this article had a structural recovery after shear of 75.57%, lower than any of the other three samples (silicone-modified emulsifier: 91.16%). At 25 °C, after 30 days, a halo and slight leakage of a milky-white water phase appeared on the surface; at 45 °C, clear water-phase leakage was seen on day 30. Owing to its higher viscosity, this sample showed less creaming on centrifugation than two of the other samples. The authors suggest that the rigid hydrophobic tails form a “brittle” interfacial film when subjected to the action of pigment particles. Three of the seven authors are affiliated with a cosmetics company
Lee et al., 2023Water-in-silicone sunscreen containing 16.1% zinc oxide, 5.1% nano zinc oxide and 3.8% calamineThe formula contained 1% of the ingredient in this article together with three other emulsifiers and dispersants. The study evaluated the shape of the zinc oxide particles, not the emulsifier on its own. Most of the authors are affiliated with a company
Fukuhara et al., 2025Polyhydroxystearic acid (not the ingredient in this article) adsorbing onto titanium dioxide nanoparticles in diethyl sebacate oilThe adsorbed amount increased with concentration and then plateaued; adding a cyclic silicone increased adsorption of the larger oligomers. Two of the three authors are affiliated with a cosmetics company

Zhu's results come from a heavily pigmented double emulsion with a fixed formula, so they should not be used to conclude that this ingredient performs poorly in every W/O cream. But they show that it should not be assumed to “make creams stable”: the choice of emulsifier must be based on stability testing of the actual formula.

4. Concentrations

SourceSystemUse level
Zhu 2026Pigmented W/O/W liquid foundation1.5% (as the W/O emulsifier being compared; the oil phase also contained a small amount of a silicone emulsifier and another polyglyceryl ester)
Lee 2023Water-in-silicone sunscreen1%, combined with silicone emulsifiers
Butter-C in-house prototype formulasW/O creams, mineral sunscreens2–4% (formulation experience, not yet checked against published sources)

The CIR report on polyglyceryl fatty acid esters (published in a journal in 2023) describes concentrations of use. We have not been able to read the full text to confirm whether this ingredient is on the list and what concentration was reported for it, so this article does not give a “CIR level”.

5. How to use and combine

  • Oil-phase structure: waxes can help hold the water droplets in W/O creams — see the article on beeswax (Cera Alba) (in Vietnamese).
  • Salt in the water phase: Zhu used 0.12% magnesium sulfate in the innermost water phase. Data on the stabilizing effect of salt in W/O emulsions are inconsistent — see the article on magnesium sulfate (in Vietnamese); test samples with and without salt side by side.
  • Mineral UV filters, pigments: with zinc oxide (in Vietnamese) and titanium dioxide (in Vietnamese), choose hydrophobically coated powder grades for the oil phase and disperse them thoroughly before emulsifying (formulation practice). Pigment particles were one source of instability in Zhu's study.
  • Stability testing: the tests in Zhu's study are a practical guide: storage at −15, 25 and 45 °C for 30 days, centrifugation and microscopy; watch for water leakage, surface halos and color floating.
  • Acne: there are no published comedogenicity data for this ingredient.

6. Safety

CIR, polyglyceryl fatty acid esters: the Expert Panel assessed 274 esters, each a polyether of 2–20 glyceryl units esterified with simple carboxylic acids such as fatty acids, and concluded that these ingredients are safe in the present practices of use and concentration described in the report when formulated to be non-irritating (Fiume 2023). We have read only the abstract and have not confirmed that the ingredient in this article is on the list of 274 substances.

CIR, polyhydroxystearic acid: safe in the present practices of use and concentration described in the assessment (Raj 2026). This conclusion is for polyhydroxystearic acid, not for its polyglyceryl ester.

Allergy: in a PubMed search (November 19, 2026), we found no case reports of contact allergy caused by this ingredient; the absence of reports does not mean it is “non-allergenic”. 12-hydroxystearic acid itself caused severe allergic contact dermatitis in a 34-year-old man through a lip balm; he also reacted to hydrogenated castor oil in an underarm deodorant, and had a positive patch test to bis-diglyceryl polyacyladipate-2, an ester containing 12-hydroxystearic acid (Shaw 2009, a single case report). There are no data showing that such a reaction occurs with the ingredient in this article; people with a known allergy to 12-hydroxystearic acid should consult a dermatologist before use.

Irritation, sensitization: we have not been able to read any human or animal test data for this ingredient on its own.

Pregnancy, breastfeeding: data are insufficient; consult a doctor.

7. Notes for brand owners

ASEAN regulations: Polyglyceryl-2 Dipolyhydroxystearate is not listed in Annexes II, III, VI (version 2026-1 of June 22, 2026) or VII (version 2025-2) of the ASEAN Cosmetic Directive — searched by INCI name, “polyglycer”, “hydroxystear” and CAS 144470-58-6.

  • Quality: request a certificate of analysis (COA) for each lot; ask about the source of the 12-hydroxystearic acid and polyglycerin if you want to state “plant-based”.
  • Appropriate claims: “water-in-oil cream”; “PEG-free” only when the whole formula contains no PEG ingredients.
  • Avoid: “waterproof” or “water-resistant” without testing the finished product by a standard method; “non-comedogenic”, “non-allergenic”, “biodegradable” or “plant-based” without data or documentation for the product itself.

Butter-C can use polyglyceryl-2 dipolyhydroxystearate as the main emulsifier in some contract-manufactured W/O formulas, such as diaper cream with zinc oxide and mineral sunscreen; the ratio is finalized by stability testing and microscopic checks for powder agglomeration on small batches.

Frequently asked questions

Is polyglyceryl-2 dipolyhydroxystearate a PEG?

No. The chemical name in PubChem includes only polyglycerin and a polymer of 12-hydroxystearic acid, with no polyethylene glycol segment. Do not confuse it with PEG-30 Dipolyhydroxystearate, a substance that does have PEG segments.

Why is this ingredient often used in mineral sunscreens?

Because it is an emulsifier for W/O creams, and its polyhydroxystearic acid part, when used on its own, is a dispersant for metal oxide powders. The dispersing benefit of this ingredient itself is formulation experience; no study has measured it specifically.

Is this ingredient safe for baby skin?

There are no data from testing specifically on children in the sources we have read. The CIR conclusion for polyglyceryl esters comes with the condition “when formulated to be non-irritating” (it has not been confirmed that this ingredient is on the report's list); products for children require a safety assessment and tolerance testing on the finished product.

Does polyglyceryl-2 dipolyhydroxystearate cause acne?

There are no published comedogenicity data for this ingredient, so no conclusion can be drawn either way.

Can it be used during pregnancy?

There are insufficient human data; consult a doctor.

References

  1. Fiume MM et al. Safety Assessment of Polyglyceryl Fatty Acid Esters as Used in Cosmetics. Int J Toxicol. 2023. PMID 37279183
  2. Raj PS et al. Safety Assessment of Polyhydroxystearic Acid, Poly(3-Hydroxyoctanoic Acid), and Polylactic Acid as Used in Cosmetics. Int J Toxicol. 2026. PMID 42493820
  3. Zhu C et al. Tailoring the Stability of W/O/W Liquid Foundations: A Comparative Study of Polyglycerol-Based W/O Emulsifiers. ACS Omega. 2026. PMID 41835609
  4. Lee JH et al. Synthesis of Planar-Type ZnO Powder in Non-Nano Scale Dimension and Its Application in Ultraviolet Protection Cosmetics. Materials (Basel). 2023. PMID 36903214
  5. Fukuhara R et al. Size- and Concentration-Dependent Adsorption of Polydisperse Dispersant Oligomers to TiO(2) Nanoparticles and the Effect of Adding Poor Solvents. Langmuir. 2025. PMID 40329567
  6. Shaw DW. Allergic contact dermatitis from 12-hydroxystearic Acid and hydrogenated castor oil. Dermatitis. 2009. PMID 19958732
  7. PubChem. Polyglyceryl-2 dipolyhydroxystearate, Substance SID 223369714 (ChemIDplus). https://pubchem.ncbi.nlm.nih.gov/substance/223369714

Get started

Talk to us about the product you plan to launch

Please send us your product direction and expected quantities. Our team will get back to you during business hours.

Công ty cổ phần Dược mỹ phẩm Butter-C · Business registration no. 0108681386 (Hanoi Department of Planning and Investment, 03/04/2019)
Head office: Huu Le village, Dai Thanh commune, Hanoi · Factory: Thanh Oai Industrial Cluster, Binh Minh commune, Hanoi, Vietnam
Hotline 0967 176 511 · [email protected] · privacy policy
Product catalog →