Cosmetic ingredients

22/11/2026 9 min read

Ammonium Acryloyldimethyltaurate/VP Copolymer: gelling polymer

Ammonium Acryloyldimethyltaurate/VP Copolymer is a familiar gelling agent in skin-care gels and gel-creams. It is a texturizing excipient: the available data cover viscosity, stability and safety, and there is no evidence yet of a benefit on the skin.

Ammonium Acryloyldimethyltaurate/VP Copolymer: gelling polymer
Thick, pale pink gel swatches on a white background, illustrating the texture of a water gel made with a gelling polymer (illustrative image, not a sample of the raw material)

Ammonium Acryloyldimethyltaurate/VP Copolymer (INCI) is a synthetic copolymer of the ammonium salt of acryloyldimethyltaurate and vinylpyrrolidone (VP), used as an aqueous viscosity increasing agent — that is, a gelling agent — in skin-care gels, gel-creams and serums. It is a texturizing ingredient, not a skin-care active.

This article continues our series on gelling polymers: carbomer (in Vietnamese), sodium polyacrylate and Acrylates/C10-30 Alkyl Acrylate Crosspolymer.

1. What is Ammonium Acryloyldimethyltaurate/VP Copolymer?

According to the draft report for public comment (October 2016) of the CIR (Cosmetic Ingredient Review) Expert Panel, it is a copolymer of two monomers, ammonium acryloyldimethyltaurate and vinylpyrrolidone, with the reported function “viscosity increasing agent – aqueous”. The data CIR cites come from a public report by Australia's industrial chemicals agency (NICNAS): a white powder, molecular weight above 1,000 g/mol, water solubility above 5 g/L at 20 °C.

As a polymer, it has no fixed molecular formula. The two monomers, however, are defined (PubChem): acryloyldimethyltaurine in its acid form (2-acrylamido-2-methylpropanesulfonic acid, abbreviated AMPS), C7H13NO4S, 207.25 g/mol, CAS 15214-89-8; and N-vinyl-2-pyrrolidone (NVP), C6H9NO, 111.14 g/mol, CAS 88-12-0. NVP is also the monomer of PVP (in Vietnamese). In this polymer, the sulfonic acid groups are already in the ammonium salt form.

Gelling polymerForm when added to the formulaNeutralization step
CarbomerCrosslinked acrylic acid polymer, acid formMust be neutralized with a base to form a gel
Acrylates/C10-30 Alkyl Acrylate CrosspolymerModified acrylic polymer, acid formMust be neutralized
Sodium PolyacrylateSodium salt of polyacrylic acidNot needed; swells when dispersed
Ammonium Acryloyldimethyltaurate/VP CopolymerAmmonium salt; the charged groups are sulfonateNot needed (inferred from the salt form; follow the technical documentation for the procedure)

2. How does this polymer thicken?

The sulfonate groups (–SO3−) along the chain carry a negative charge and repel one another, so the chain extends and holds water; the VP segments are uncharged. The sulfonic acid group is a stronger acid than the carboxyl groups of carbomer, so in theory it remains ionized at lower pH (background knowledge of functional group chemistry). We have no verified scientific source for the working pH range; take it from the technical data sheet (TDS) for the raw material grade.

Based on background knowledge of polyelectrolytes, ions and actives in salt form screen the charges, the chains contract and the gel thins. One consistent observation: a sodium hyaluronate hydrogel with this polymer added had a viscosity of 12,623 ± 379 cP without the drug and 6,750 ± 160 cP when it contained bupivacaine hydrochloride, a drug in salt form (Wójcik-Pastuszka et al., 2024). The abstract does not analyze the cause; the result belongs to the gel system as a whole, because sodium hyaluronate is also a charged polymer.

3. Evidence: a formulation role, not a skin benefit

In a PubMed search (November 22, 2026), we found no clinical trial measuring a skin effect of this polymer on its own; all the studies used it as a gelling excipient. Some abstracts refer to the ingredient by a trade name, which corresponds to this INCI according to the references of the 2016 CIR draft.

StudyModelMain findings (per the abstract)Note
Wójcik-Pastuszka et al., 2024Drug-loaded sodium hyaluronate hydrogel for intra-articular injection, with added synthetic polymersHighest viscosity and slowest drug release (release half-time 199.5 ± 17.6 minutes)Intra-articular pharmaceutical, not a cosmetic
Kelmann et al., 2018Pentyl gallate nanoemulsion thickened with this polymer or with chitosanPseudoplastic flow; did not increase permeation or slow release; physically stable for 3 months at 8 °CFormulation study, in vitro
Petrov et al., 2022Hydrogel containing 5% galacto-oligosaccharides (GOS); Franz diffusion cellGOS remained on the surface of the skin-mimicking membrane after 24 hoursIn vitro; result for the formula as a whole
Sobral-Souza et al., 2022Tooth-bleaching gels, accelerated storage at 40 °C and 75% humidity for up to 6 monthsGels containing only the thickener (this polymer or carbomer) showed no change in pH or mass; gels with 10% carbamide peroxide lost peroxide from the first monthOral care product, not skin

So this polymer has formulation data but no evidence of a skin-care benefit. Descriptions such as “cooling”, “water-burst” and “fast-absorbing” were not measured in the abstracts we reviewed.

4. Reported concentrations and product types

The figures below come from the 2016 CIR draft (2016 FDA VCRP data and a 2015–2016 survey by the US cosmetics industry association). They are the maximum concentrations reported in products on the US market, not recommended levels.

Product categoryReported data
Number of uses (VCRP 2016)456 (428 leave-on products, 28 rinse-off)
Leave-on products0.016–3%
Rinse-off products0.3–1.8%
Eye area1.4–3%
Non-coloring hair care (tonics, dressings, grooming aids)up to 0.4%
Products that may be sprayed0.096–1%
Products in contact with mucous membranes1.5%

According to the same draft, NICNAS concluded that the substance is of low concern to public health when used in cosmetics at 0.5–1.2%, the concentration range the supplier put forward for assessment.

Common product types: moisturizing gels, gel-creams, serums and gel sleeping masks (see moisturizing gel manufacturing).

5. How to incorporate it and what to combine it with

  • Dispersion: sprinkle the powder into the water phase while stirring; there is no neutralization step as with carbomer. Follow the TDS for mixing and hydration parameters (Butter-C formulation handbook, chapter “Gels and gelling agents”, Section 3.2 — practical knowledge from supplier documents).
  • Avoid strongly alkaline conditions: the NICNAS data cited by CIR state that the polymer is stable under normal conditions but may release ammonia under alkaline conditions.
  • Electrolytes, actives in salt form, cationic ingredients: may reduce viscosity (Section 2). Add them step by step and measure viscosity after each step.
  • Alcohol: we have not found a verified study on how much alcohol this polymer tolerates; follow the TDS and test on samples.
  • Unstable actives: stability depends on the whole formula, not on the thickener alone (for example, the peroxide gels in Section 3).

6. Safety and who should take care

CIR conclusion: CIR's Quick Reference Table (updated December 2025) lists Ammonium Acryloyldimethyltaurate/VP Copolymer as “S” — safe in the present practices of use and concentration — with the most recent citation being the report on vinylpyrrolidone polymers published in 2024 (Johnson et al., 2024). The abstract of that report states that 27 vinylpyrrolidone polymers were concluded to be safe, while the data were insufficient for 3 urethane polymers. Before that, this ingredient was one of the 21 acryloyldimethyltaurate polymers that the 2016 CIR draft concluded to be safe in the present practices of use and concentration.

Data specific to this ingredient (2016 CIR draft, citing the NICNAS public report): not irritating to rabbit skin (OECD TG 404), not irritating to rabbit eyes (OECD TG 405), not sensitizing in guinea pigs (OECD TG 406), oral LD50 in rats above 2,000 mg/kg, and not mutagenic in a bacterial reverse mutation test. The test concentrations are not clearly stated. The draft contains no human repeated insult patch test (HRIPT) for this ingredient specifically; the negative HRIPTs are for other polymers in the same group. CIR reasoned that, because the molecules are large, they are not expected to be absorbed through the skin.

Contact allergy: a PubMed search (November 22, 2026) for “acryloyldimethyltaurate” combined with dermatitis, allergy and patch test found no case reports. People with a history of cosmetic allergy should test on a small area of skin.

Residual monomers: the 2016 CIR draft raised concerns about residual monomers across the whole group (naming acrylamide, vinyl formamide and methacrylamidolauric acid — none of which is a monomer of this ingredient) and emphasized good manufacturing practices; there are no residual AMPS or NVP data for this ingredient specifically.

Pregnancy and breastfeeding: the 2016 CIR draft found no reproductive or developmental toxicity data for this group of polymers; the data are insufficient, so consult a doctor.

7. A perspective for brand owners (B2B)

  • ASEAN (Annexes II, III and VI, version 2026-1 of June 22, 2026; Annex VII, December 2025 version): Ammonium Acryloyldimethyltaurate/VP Copolymer is not listed in these four annexes. The monomer NVP is in Annex II (prohibited substances), Ref 1113: “1-Vinyl-2-pyrrolidone 88-12-0”. Acrylamide is in Annex II, Ref 681 (“Acrylamide, unless regulated elsewhere in this Directive”); Annex III, Ref 66 “Polyacrylamides” limits residual acrylamide to 0.1 mg/kg in leave-on body products and 0.5 mg/kg in other products. AMPS is not listed in the annexes we checked.
  • The reading Butter-C currently applies — to be confirmed by regulatory specialists: according to the INCI definition, this polymer has no acrylamide monomer, and the 2016 CIR draft names only copolymers with an acrylamide monomer as subject to EU Annex III/66. Even so, our internal rules table still links this ingredient to Ref 66 so that suppliers are required to confirm residual acrylamide. Annex II sets no residual threshold for NVP; residual NVP data should be obtained for regulatory specialists to assess.
  • Raw material documentation: a COA or a confirmation letter stating residual NVP and AMPS, and acrylamide if data are available.
  • Claims: this polymer builds texture; avoid attributing “hydrating” or “restoring” benefits to it. Sensory statements (“cooling gel”, “fast-absorbing”) should be used only after they have been evaluated on the finished product.

Butter-C uses this polymer as one gel-base option when manufacturing moisturizing gels and gel-creams, checking stability and residual-monomer documentation for each formula.

Frequently asked questions

Does Ammonium Acryloyldimethyltaurate/VP Copolymer moisturize the skin?

No study in the sources we searched shows that. Its role is to build texture; moisture comes from the humectants in the formula.

Does it need to be neutralized like carbomer?

There is no neutralization step, because the polymer is already in the ammonium salt form. Follow the supplier's technical documentation for the dispersion procedure and the working pH range.

Does this ingredient contain acrylamide?

According to the INCI definition, the two monomers are ammonium acryloyldimethyltaurate and vinylpyrrolidone; acrylamide is not one of them. AMPS is an N-substituted derivative of acrylamide (according to its IUPAC name on PubChem), not acrylamide itself (CAS 79-06-1). It is still advisable to request residual impurity data.

Can it be used on sensitive skin?

Animal tests recorded no irritation or sensitization, and we have found no case reports of allergy. Tolerance also depends on the whole formula.

Can pregnant women use it?

The data are insufficient; consult a doctor.

References

  1. Cosmetic Ingredient Review. Quick Reference Table (updated December 2025). https://www.cir-safety.org/sites/default/files/QRT_Update_Dec2025.pdf
  2. Johnson W Jr et al. Safety Assessment of Vinylpyrrolidone Polymers as Used in Cosmetics. Int J Toxicol. 2024. PMID 39045851
  3. Cosmetic Ingredient Review. Safety Assessment of Acryloyldimethyltaurate Polymers as Used in Cosmetics — draft for public comment (Tentative Report for Public Comment), October 7, 2016. https://www.cir-safety.org/sites/default/files/ACTAPY092016TR%20-%20final.pdf
  4. Wójcik-Pastuszka D et al. The Effects of Synthetic Polymers on the Release Patterns of Bupivacaine Hydrochloride from Sodium Hyaluronate Hydrogels. Biomedicines. 2024. PMID 39857623
  5. Kelmann RG et al. Nanoemulsion-Loaded Hydrogels for Topical Administration of Pentyl Gallate. AAPS PharmSciTech. 2018. PMID 29943283
  6. Petrov A et al. Prebiotic effect of galacto-oligosaccharides on the skin microbiota and determination of their diffusion properties. Int J Cosmet Sci. 2022. PMID 35428999
  7. Sobral-Souza DF et al. Effect of accelerated stability on the physical, chemical, and mechanical properties of experimental bleaching gels containing different bioadhesive polymers. Clin Oral Investig. 2022. PMID 35006292
  8. NCBI PubChem. 2-Acrylamido-2-methyl-1-propanesulfonic acid (CID 65360); N-vinyl-2-pyrrolidone (CID 6917). https://pubchem.ncbi.nlm.nih.gov/compound/65360 · https://pubchem.ncbi.nlm.nih.gov/compound/6917

Get started

Talk to us about the product you plan to launch

Please send us your product direction and expected quantities. Our team will get back to you during business hours.

Công ty cổ phần Dược mỹ phẩm Butter-C · Business registration no. 0108681386 (Hanoi Department of Planning and Investment, 03/04/2019)
Head office: Huu Le village, Dai Thanh commune, Hanoi · Factory: Thanh Oai Industrial Cluster, Binh Minh commune, Hanoi, Vietnam
Hotline 0967 176 511 · [email protected] · privacy policy
Product catalog →