Sodium Polyacrylate in cosmetics: gel-cream polymer, safety
Sodium Polyacrylate thickens gel-creams without a neutralization step, but it can thin out when it meets salts. A single INCI name also covers several different raw material grades — and the microplastics question in the EU market depends on exactly which grade is used.
Sodium Polyacrylate (INCI: Sodium Polyacrylate) is the sodium salt of polyacrylic acid — a synthetic polymer made from the monomer acrylic acid. In cosmetics, it mainly thickens the water phase, creates a gel-cream texture and helps keep emulsions stable; it is not a skin-care active ingredient.
This article summarizes what the verified sources say about its mechanism, incompatibilities, patch test data, residual monomer and microplastics regulations.
1. What is Sodium Polyacrylate?
Chemically, it is poly(acrylic acid) in which the carboxyl groups have been converted to the sodium salt (–COO⁻Na⁺). On PubChem, several substance records named “sodium polyacrylate” or “poly(acrylic acid sodium salt)” share CAS number 9003-04-7, including both powders and aqueous solutions. As a polymer, it has no fixed formula or molecular weight; only the monomers are defined: acrylic acid C₃H₄O₂ (72.06 g/mol) and sodium acrylate C₃H₃NaO₂ (94.04 g/mol).
| Raw material form | Characteristics | Ask the supplier about |
|---|---|---|
| Linear, water-soluble polymer | Thickens solutions; available in both solid and liquid forms (Rozman 2021) | Molecular weight, solubility |
| Crosslinked polymer | Swells and holds a large amount of water; superabsorbent polymers of the same family are the material used in disposable diapers (background knowledge) | Degree of crosslinking, particle size, residual monomer |
| Dispersion in oil with surfactants | The polymer is released on contact with water; suited to cold processes (Butter-C formulation handbook, chapter “Gels and gelling agents”, Section 3.2 — based on supplier documents) | The accompanying oil and surfactants must appear in the ingredient list |
Unlike carbomer (in Vietnamese), which is in acid form and must be neutralized to form a gel, Sodium Polyacrylate is already in salt form, so it swells as soon as it is dispersed.
2. How it thickens and binds water
The –COO⁻ groups along the polymer chain carry a negative charge and repel one another, so the chain extends and holds water around the Na⁺ ions; in crosslinked polymers, each particle swells into a microgel and the microgels pack tightly together to build viscosity (background knowledge of polyelectrolytes). Two important consequences for formulation:
- Salts: ions in solution screen the charges, the chains contract and viscosity drops. This is a general mechanism of anionic polymers; the extent depends on the polymer grade (background knowledge).
- Multivalent cations: Al³⁺ can link negatively charged chains together. Lee et al. (2003) used this very mechanism to make hydrogel patches: sodium polyacrylate and carboxymethylcellulose were crosslinked with Al³⁺ (generated from dihydroxy aluminum aminoacetate and tartaric acid); a semisolid gel formed only when the reaction ran for more than 12 hours. In gel-creams, metal salts with multivalent cations may change the texture unintentionally (inference; not yet studied in cosmetics).
3. Evidence: a texturizing role, mostly laboratory data
In the PubMed abstracts we searched (November 2026), there is no clinical trial measuring a skin benefit of Sodium Polyacrylate on its own; the data come from formulation and safety studies — limited evidence for any benefit beyond its role in texture.
| Study | Type | Relevance to Sodium Polyacrylate |
|---|---|---|
| Cizauskaite 2016 | Formulation, in vitro | A water-in-oil-in-water multiple emulsion used 0.5% of an emulsifier consisting of a sodium polyacrylate – polysorbate 20 complex; the main results relate to the added rosemary extract, not the polymer |
| Lee 2003 | Formulation, in vitro | Hydrogel patch based on sodium polyacrylate and carboxymethylcellulose crosslinked with Al³⁺; adhesive force 45.5 gmf, easy to apply to and peel off facial skin |
4. Typical concentrations and product types
We have not found a verified scientific source for a general use range of Sodium Polyacrylate in cosmetics. Published example: 0.5% sodium polyacrylate – polysorbate 20 complex in a multiple emulsion (Cizauskaite 2016).
In Butter-C's internal formula suggestions, Sodium Polyacrylate is usually set at about 0.3–2% (formulation experience, not yet backed by a verified scientific source; must be tested in the formula). Dispersion forms are only partly polymer, so calculate the amount based on the polymer content stated on the certificate of analysis (COA).
Suitable formats: gel-creams, sleeping masks, light-textured moisturizing creams, hand creams and body lotions. When additional oil-in-water emulsion stability is needed, it can be compared with Acrylates/C10-30 Alkyl Acrylate Crosspolymer.
5. Combining it in formulas: dos and don'ts
| Situation | Assessment | Reason |
|---|---|---|
| Cold process, gel-cream low in electrolytes | Suitable | No neutralization step needed (Butter-C handbook, based on supplier documents) |
| High salt content, actives in salt form, mineral-rich extracts | Test early | Ions screen the charges and viscosity drops (background knowledge) |
| Aluminum salts, metal salts with multivalent cations | Test early | Al³⁺ crosslinks sodium polyacrylate (Lee 2003); may cause clumping or a change in texture |
| Cationic surfactants, cationic polymers | Test compatibility | Anionic polymers may form complexes, causing cloudiness or reduced viscosity (background knowledge) |
| Actives that require a low pH | Follow the technical data sheet (TDS) for the grade | No verified scientific source for the working pH range |
General practice: add salts and ionized actives after the gel has formed; measure viscosity after each step and after storing samples at high and low temperatures.
6. Safety and who should take note
Contact allergy: a survey at 20 centers in the UK and Ireland (September 2021–September 2022) patch tested sodium polyacrylate 2% in water on 1,302 patients (suspected (meth)acrylate allergy, facial dermatitis, or consecutive patients). Results: 4 irritant reactions, 1 doubtful and 1 positive; the relevance of all 6 was unclear, and none demonstrated (meth)acrylate allergy. The authors concluded that sensitization at the tested concentration is rare (Soriano 2024). The study was conducted in collaboration with the UK cosmetics industry association and included industry-affiliated authors; the subjects were patch test patients, not the general population. For how acrylic monomers and polymers differ, see the article on Acrylates Copolymer (in Vietnamese).
Residual monomer: because the polymer is made from acrylic acid, the raw material may contain traces of monomer. In mice and rats, acrylic acid applied to the skin was partly absorbed (about 12% and 19–26% of the dose, respectively; the rest apparently evaporated) and was rapidly metabolized; according to the authors, this explains why acrylic acid has low systemic toxicity even though it causes irritation at the site of contact (Black 1995, animal study, chemical-industry-affiliated authors). These are data for the monomer, not for the polymer. It is advisable to request a COA that states the residual acrylic acid content.
CIR conclusion: according to the quick reference table (September 2020 version) of the US CIR (Cosmetic Ingredient Review) Expert Panel, Sodium Polyacrylate belongs to the group of 126 acrylates copolymers concluded to be safe in cosmetics in the present practices of use and concentration described when formulated to be non-irritating (2002 report, final report December 2018). We have not been able to read the full official text of the 2018 report, so this article does not cite its surveyed concentration data; the group conclusion is also given in the carbomer and Acrylates Copolymer articles.
Who should take note: people who have been diagnosed with (meth)acrylate allergy should consult a dermatologist, even though patch test data show that reactions are rare. Pregnant or breastfeeding women: data are insufficient; consult a doctor.
7. Perspective for brand owners (B2B)
- ASEAN: searched by name, “polyacrylate”, “acrylic acid” and CAS 9003-04-7 and 79-10-7: Sodium Polyacrylate and acrylic acid are not listed in Annexes II, III, VI (version 2026-1) or VII (version 2025-2) of the ASEAN Cosmetic Directive. Annex III, Ref 66 (“Polyacrylamides”, limit on residual acrylamide) does not mention Sodium Polyacrylate; copolymers containing acrylamide have different INCI names and need to be reviewed separately.
- Microplastics in the EU — different from ASEAN: Regulation (EU) 2023/2055 restricts “synthetic polymer microparticles”: solid polymers in particle form (all dimensions ≤ 5 mm, or length ≤ 15 mm with a length-to-diameter ratio > 3) when intentionally present at 0.01% by weight or more. It excludes natural polymers that have not been chemically modified, degradable polymers, polymers with a solubility above 2 g/L (tested at 20 °C, pH 7, 24 hours) and polymers that do not contain carbon. The text does not name Sodium Polyacrylate; linear and crosslinked grades may give different results — regulatory affairs should confirm on the basis of the supplier's solubility and degradation data. Dates for cosmetics: rinse-off products from October 17, 2027 (for products containing abrasive “microbeads”, the restriction applies as soon as the regulation enters into force), leave-on products from October 17, 2029, and lip, nail and makeup products from October 17, 2035. The ASEAN cosmetic annexes we checked have no comparable entry on microplastics.
- Environment: four water-soluble polyacrylic acid–based polymers used in cosmetics (the abstract does not give their INCI names) were all non-biodegradable in testing; their ecotoxic effects were low to moderate, except that the liquid sample clearly inhibited nitrifying microorganisms at 100 mg/L (Rozman 2021). Do not state “biodegradable” without data for the specific raw material grade.
- Documentation and claims: the COA should state the raw material form, polymer content and residual acrylic acid; for dispersion forms, the accompanying oil and surfactants must be fully declared. Suitable wording: “light gel-cream texture” (tested on the finished product); do not claim a moisturizing effect for the polymer itself, and do not state “does not cause allergies”.
Butter-C can use Sodium Polyacrylate in contract manufacturing of gel-creams, sleeping masks and light-textured creams, choosing the raw material grade according to the electrolyte content of each formula.
Frequently asked questions
Is Sodium Polyacrylate a plastic, or a microplastic?
It is a synthetic polymer made from acrylic acid. Whether it falls under the EU definition of “synthetic polymer microparticles” depends on the particle form and solubility of each grade; the ASEAN cosmetic annexes do not yet have a corresponding provision.
Is it the same as the superabsorbent in disposable diapers?
It belongs to the same family of acrylic acid–based polymers, but cosmetic grades may differ in degree of crosslinking, particle size and raw material form; do not extrapolate data from one grade to another.
Does Sodium Polyacrylate cause irritation or allergies?
Patch testing with a 2% solution on 1,302 patients showed that reactions are rare (Soriano 2024). How well a finished product is tolerated also depends on the whole formula.
How does Sodium Polyacrylate differ from carbomer?
Carbomer is in acid form and must be neutralized to form a gel; Sodium Polyacrylate is already in salt form, so it swells as soon as it is dispersed. Both are anionic polymers that are sensitive to salts and cationic ingredients.
Can pregnant women use products containing Sodium Polyacrylate?
There are not enough specific data; consult a doctor.
References
- Soriano LF et al. Sensitisation to the acrylate co-polymers glyceryl acrylate/acrylic acid co-polymer, sodium polyacrylate and acrylates/C10-30 alkyl acrylate cross-polymer (Carbopol®) is rare. Contact Dermatitis. 2024. PMID 39187930
- Cizauskaite U et al. Rosmarinus officinalis L. extract and some of its active ingredients as potential emulsion stabilizers: a new approach to the formation of multiple (W/O/W) emulsion. Pharm Dev Technol. 2016. PMID 26000558
- Cosmetic Ingredient Review. Quick Reference Table (September 2020), entry for Sodium Polyacrylate. https://www.cir-safety.org/sites/default/files/sq-fix_2.pdf
- Lee TW et al. Hydrogel patches containing triclosan for acne treatment. Eur J Pharm Biopharm. 2003. PMID 14602184
- Black KA et al. Disposition and metabolism of acrylic acid in C3H mice and Fischer 344 rats after oral or cutaneous administration. J Toxicol Environ Health. 1995. PMID 7609004
- Rozman U, Kalčíková G. The first comprehensive study evaluating the ecotoxicity and biodegradability of water-soluble polymers used in personal care products and cosmetics. Ecotoxicol Environ Saf. 2021. PMID 34839136
- Commission Regulation (EU) 2023/2055 amending Annex XVII to Regulation (EC) No 1907/2006 as regards synthetic polymer microparticles. https://publications.europa.eu/resource/cellar/acbe2469-5d16-11ee-9220-01aa75ed71a1.0006.03/DOC_1
- PubChem. Sodium polyacrylate (CAS 9003-04-7), Substance SID 176259385. https://pubchem.ncbi.nlm.nih.gov/substance/176259385
BUTTER-C