Cosmetic ingredients

22/11/2026 9 min read

MBBT (bisoctrizole) in cosmetics: a particulate UV filter

MBBT is an organic UV filter, milled into fine particles dispersed in water, that absorbs both UVB and UVA. This article summarizes skin penetration data, the conclusions of the European scientific committee on the nano form, the role of decyl glucoside in allergy cases and the conditions set out in ASEAN Annex VII.

MBBT (bisoctrizole) in cosmetics: a particulate UV filter
An ivory-white sunshade umbrella under a blue sky — illustrating shielding from UV rays; MBBT is a particulate UV filter used in sunscreens

MBBT (INCI name: Methylene Bis-Benzotriazolyl Tetramethylbutylphenol; International Nonproprietary Name: bisoctrizole) is an organic UV filter that is practically insoluble in water. It is usually supplied as very fine particles dispersed in water and absorbs both UVB and UVA radiation. In ASEAN, MBBT may be used at a maximum of 10% (Annex VII, Ref 23 for the conventional form, Ref 23a for the nano form; when both forms are used, the total must not exceed 10%).

1. What is MBBT?

MBBT is a large molecule made of two hydroxyphenyl-benzotriazole halves joined by a methylene bridge; it is highly lipophilic and practically insoluble in water.

ParameterDataSource
Formula, molecular weightC41H50N6O2; 658.9 g/molPubChem (CID 3571576)
CAS number103597-45-1PubChem; Annex VII
SolubilityBelow 5 ng/L in water at 25 °C; 170 mg/100 g in a fat simulant at 37 °CSCCS 2015
log Pow12.7 at 25 °C (calculated value) — highly lipophilicSCCS 2015; Annex VII
Physical formSlightly yellowish powder (unmilled); the nano form is a white, viscous dispersionSCCS 2015

According to the dossier assessed in 2015 by the European Scientific Committee on Consumer Safety (SCCS), the commercial raw material is ball-milled in water with decyl glucoside as the dispersing agent, and xanthan gum is then added to prevent settling. Typical composition: MBBT 46–55%, decyl glucoside 6–10%, propylene glycol 0.2–0.6%, xanthan gum 0.1–0.5%, water 40–42%; pH 10.5–12; mean particle size d(0.5) about 122 nm (n = 32). The SCCS considered the median to be about 120 nm or more by mass and about 60 nm or more by number.

2. Mechanism: absorbing UV radiation in particulate form

According to the dossier data in the 2015 SCCS opinion, dissolved MBBT has two absorption bands: around 305 nm (UVB) and 350 nm (UVA). In the dispersed particulate form, the longer-wavelength band shifts to 360 nm with a shoulder at 380 nm, and the shorter-wavelength band gains a shoulder at 320 nm. The dossier states that this change cannot be explained by the additional scattering but results from electronic interactions between the chromophores within the particle; the smaller the particles, the more efficient the UV absorption.

MBBT is therefore essentially a UV absorber; the particulate form adds some scattering, but the sources reviewed do not quantify this contribution. One case report describes MBBT as having “both organic and inorganic properties” (Gonzalez et al., 2011). All sources classify MBBT as an organic filter: calling it a “mineral” filter is incorrect, and calling it “physical” invites confusion with zinc oxide and titanium dioxide.

Herzog et al. (2002; the first author is affiliated with a UV filter manufacturer) compared avobenzone, MBBT and microfine zinc oxide in test formulations: the UVA protection factor measured in humans increased with the concentration of the UVA filter; after irradiation with 10 MED, only some of the avobenzone-containing formulations showed a significant decrease in the UVA/UVB ratio or the critical wavelength (measured in vitro), i.e., a loss of UVA protection. The SPF and UVA protection of an actual product must still be measured on the finished product.

3. Does MBBT penetrate the skin?

StudyDesignMain results
Adlhart et al., 20113 volunteers; 1 mg/cm² of a formulation containing 10% MBBT applied to the forearm; 15 tape strips removed and analyzed by Raman microscopyRecovery 91.1%: 30.2% on the skin surface, 42.5% in the upper stratum corneum (strips 2–5). 75% of the particles were concentrated in one-fifth of the area, mainly in skin folds and furrows. The fraction at sites not connected to the surface was 0.06%
Dossier in the 2015 SCCS opinionIn vitro, human skin, nano MBBT (median 90–99 nm)Mean absorption 0.02% of the applied dose (conservative estimate 0.048%); damaged skin: 0.07% (conservative estimate 0.35%)
Dossier in the 2015 SCCS opinionRats, non-nano MBBT (particles about 0.3–2 µm), 6-hour application, 5-day follow-upAbsorption no more than 0.8% (0.2% formulation) and no more than 0.4% (10% formulation); not measurable in the circulation

The Adlhart study had a very small sample size; the SCCS figures come from the dossier submitted by the applicant. Although penetration is low, the SCCS noted that because MBBT is highly lipophilic, possible accumulation in certain tissues with long-term use should be considered. We have not found any study measuring MBBT in human blood.

4. Safety: European assessment, allergy and unknowns

  • Conventional form: according to the background section of the 2015 SCCS opinion, the safety of MBBT at a maximum of 10% had been confirmed by the predecessor committee, the SCCNFP (document SCCNFP/0080/98).
  • Nano form: based on the very low absorption through human skin and the absence of adverse effects in minipigs treated dermally with up to 1,000 mg/kg body weight/day for 39 weeks, the SCCS concluded that nano MBBT meeting the material criteria, used at up to 10% in dermally applied products, does not pose a risk of adverse effects on healthy, intact skin. The conclusion does not apply to applications that might lead to inhalation of the particles by the user, because limited data indicate severe inflammatory reactions in the respiratory tract.
  • Points the SCCS still flagged: in rats, dermal application at 20% (from 500 mg/kg/day) caused signs of pain, so irritation should be monitored through the cosmetovigilance system; a 2-year carcinogenicity study in rats showed an increase in malignant tumors in males at the low and high doses (not at the mid dose and not in females), but the SCCS considered it difficult to draw conclusions and regarded the study as not valid for the assessment.
  • Assessment in South Korea (Kim et al., 2026): the authors are affiliated with a university and a state research institute. NOAEL of 1,000 mg/kg/day (the highest dose tested) in a 90-day dermal study in rats; no adverse effects on reproduction and embryonic development in rats at up to 1,000 mg/kg/day; negative genotoxicity tests; a margin of safety greater than 100 for use at 10% in all types of cosmetics.
  • Contact allergy: cases of positive patch and photopatch test reactions to MBBT have been reported, for example in 2 patients with both atopic dermatitis and chronic actinic dermatitis (Gonzalez et al., 2011). However, decyl glucoside in a commercial MBBT raw material has been identified as a “hidden” allergen and is probably responsible for most of the allergy cases attributed to this ingredient (Alfalah et al., 2017); see the article on decyl glucoside (in Vietnamese).
  • Pregnancy and breastfeeding: human data are insufficient; consult a doctor.
  • Environment: the SCCS opinion does not assess environmental impact. A product should not be labeled “reef-safe” simply because it uses MBBT.

5. Use levels and ASEAN regulations

ItemAnnex VII, version 2025-2 (December 12, 2025)
Ref 23 — MBBTMaximum 10%; no other conditions stated
Ref 23a — MBBT (nano)Maximum 10%; not to be used in applications that may lead to exposure of the lungs by inhalation; only nanomaterials with purity ≥ 98.5% (isooctyl isomer ≤ 1.5%), solubility < 5 ng/L in water at 25 °C, log Pow 12.7, uncoated, D50 ≥ 120 nm by mass and/or ≥ 60 nm by number are allowed
Footnote (5)When both forms are used together, the total must not exceed 10%
PreambleThe label of products whose main function is sun protection must carry the statement “Do not stay too long in the sun, even while using a sunscreen product”

A search of Annexes II, III and VI (06/2026 version) by name, by “benzotriazol” and by CAS number: MBBT is not listed. The 10% limit applies to the MBBT substance itself; the dispersion raw material contains only about half MBBT, so the amount must be converted based on the content stated on the certificate of analysis (COA), and particle size data are needed to determine whether Ref 23 or Ref 23a applies. In the 2015 SCCS opinion, the finely milled aqueous dispersion is precisely the nano form that was assessed.

6. Perspective for brand owners (B2B)

  • Incorporation: the MBBT dispersion is added to the water phase (Herzog et al., 2002); temperature and timing follow the supplier’s instructions. The raw material has a pH of 10.5–12, so the pH of the finished product needs to be checked and adjusted.
  • Filter combinations: MBBT is often combined with oil-soluble filters such as bemotrizinol (BEMT) (in Vietnamese), DHHB and ethylhexyl triazone, each within its Annex VII limit; SPF, UVA protection and photostability are measured on the finished product.
  • Sprays: with nano MBBT, do not design products that could be inhaled.
  • Accompanying ingredients: know the decyl glucoside, xanthan gum and propylene glycol contained in the raw material in order to compile the ingredient list and to advise people who have previously been allergic to glucosides.
  • Appropriate claims: state “contains the UV filter MBBT” together with the measured SPF and UVA values; avoid “physical filter,” “does not penetrate the skin,” “reef-safe,” “non-allergenic” and “safe for pregnancy.” Guide consumers with the article on using sunscreen correctly.
  • Export: check the list of permitted UV filters in the importing country.

Butter-C uses MBBT in contract manufacturing of sunscreens, combining it with other filters within the limits of ASEAN Annex VII; the SPF and UVA values of each formula must be tested on the finished product.

Frequently asked questions

Is MBBT a chemical or a physical filter?

MBBT is an organic filter and is essentially a UV absorber; the particulate form adds some scattering. It is not a mineral filter like zinc oxide or titanium dioxide, so it should not be called a “physical” filter.

Does MBBT get into the bloodstream?

The amount passing through the skin in tests was very low (about 0.02% of the applied dose on human skin in vitro, according to the dossier evaluated by the SCCS); in volunteers, most of the MBBT remained on the surface and in the upper stratum corneum (Adlhart et al., 2011). Among the sources reviewed, there is no study measuring it in human blood.

What should I do if I am allergic to a sunscreen containing MBBT?

Stop using it and ask a dermatologist about patch testing. Decyl glucoside in a commercial MBBT raw material is probably responsible for most of the allergy cases attributed to this ingredient (Alfalah et al., 2017).

Can pregnant women use sunscreens containing MBBT?

Studies in rats recorded no adverse effects on reproduction and embryonic development, but there are insufficient data in pregnant women. Ask a doctor.

References

  1. ASEAN. Annex VII – List of UV filters which cosmetic products may contain (Version No. 2025-2, 12th December 2025). https://asean.org/wp-content/uploads/2026/04/Annex-VII_Release_12th-December-2025-clean.pdf
  2. Scientific Committee on Consumer Safety (SCCS). Opinion on 2,2'-Methylene-bis-(6-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol) (nano form), COLIPA n° S79 (SCCS/1546/15, revision of 25 June 2015). https://ec.europa.eu/health/scientific_committees/consumer_safety/docs/sccs_o_168.pdf
  3. Kim M et al. Safety assessment of methylene bis-benzotriazolyl tetramethylbutylphenol, a UV filter in cosmetics. Toxicol Res. 2026. PMID 42403688
  4. Herzog B et al. In vivo and in vitro assessment of UVA protection by sunscreen formulations containing either butyl methoxy dibenzoyl methane, methylene bis-benzotriazolyl tetramethylbutylphenol, or microfine ZnO. Int J Cosmet Sci. 2002. PMID 18498509
  5. Adlhart C et al. Surface distribution and depths profiling of particulate organic UV absorbers by Raman imaging and tape stripping. Int J Cosmet Sci. 2011. PMID 21692815
  6. Gonzalez ME et al. Positive patch- and photopatch-test reactions to methylene bis-benzotriazolyl tetramethylbutylphenol in patients with both atopic dermatitis and chronic actinic dermatitis. Dermatitis. 2011. PMID 21504696
  7. Alfalah M et al. Alkyl Glucosides. Dermatitis. 2017. PMID 27775973

Get started

Talk to us about the product you plan to launch

Please send us your product direction and expected quantities. Our team will get back to you during business hours.

Công ty cổ phần Dược mỹ phẩm Butter-C · Business registration no. 0108681386 (Hanoi Department of Planning and Investment, 03/04/2019)
Head office: Huu Le village, Dai Thanh commune, Hanoi · Factory: Thanh Oai Industrial Cluster, Binh Minh commune, Hanoi, Vietnam
Hotline 0967 176 511 · [email protected] · privacy policy
Product catalog →