Acetylated HA (Sodium Acetylated Hyaluronate) in cosmetics
Acetylated HA is often presented as a form of HA that “adheres to the skin and keeps it moisturized for longer.” The sources we checked show that it differs from regular HA in structure and use levels, but efficacy data in humans are scarce and come mainly from companies.
Acetylated HA (INCI: Sodium Acetylated Hyaluronate) is a derivative of sodium hyaluronate in which one or more hydroxyl groups on the hyaluronic acid chain carry an acetyl group in the form of an ester. According to the INCI definition table in the 2023 report of the CIR (Cosmetic Ingredient Review, USA) Expert Panel, this ingredient is reported to have only one function in cosmetics: humectant.
Background on HA is covered in the article hyaluronic acid in cosmetics (in Vietnamese), and the shortened-chain form is presented in the article hydrolyzed HA. This article discusses only what is specific to acetylated HA.
1. What is acetylated HA?
Hyaluronic acid is a linear polymer made of repeating disaccharide units of glucuronic acid and N-acetylglucosamine (CIR 2023). Each N-acetylglucosamine unit already carries one acetyl group; in acetylated HA, acetyl groups are additionally attached to the hydroxyl groups (–OH) of the chain in the form of esters.
As a polymer, it has no fixed molecular formula; the PubChem record SID 472401536 (source: the FDA substance registration system, UNII WN66R7GL93) gives no formula or molecular weight. CIR 2023 does not assign a separate CAS number to this ingredient. A record submitted to PubChem by a chemical vendor uses the number 9067-32-7, but according to CIR that is the CAS number of sodium hyaluronate — this number should not be listed as the CAS number of acetylated HA.
The INCI name does not specify a molecular weight or degree of acetylation; the Meunier et al. (2022) group describes their ingredient as designed with a specific molecular weight and degree of acetylation. Two suppliers using the same INCI name may sell two different materials.
2. How does it differ from regular HA?
The table below compares three INCI names using data from CIR 2023 (definitions and functions per the INCI dictionary; number of formulations per 2023 FDA data; maximum concentrations per a 2021 industry survey).
| INCI name | Definition | Reported function | Number of formulations | Maximum reported concentration |
|---|---|---|---|---|
| Sodium Hyaluronate | Sodium salt of hyaluronic acid | Skin conditioning | 4,713 | Up to 7.5% (face and neck products, not sprayed) |
| Hydrolyzed Hyaluronic Acid | Product of hydrolysis of hyaluronic acid | Hair conditioning; skin conditioning – humectant | 476 | 0.002–0.2% |
| Sodium Acetylated Hyaluronate | Acetyl ester of sodium hyaluronate, with one or more hydroxyl groups acetylated | Humectant | 455 | 0.002–0.1% |
The sources we read also note:
- Effect on collagen-degrading enzymes (MMPs): not consistent. Meunier et al. (2022) reported that acetylated HA inhibited MMP gene expression in fibroblasts; Hou et al. (2026), by contrast, found that it did not inhibit them and at higher concentrations slightly increased MMP-1 mRNA, although it increased collagen I and III mRNA. The studies used different materials and models, so no general pattern can be drawn yet.
- Skin penetration and enzyme resistance: in the full text (not in the abstract), the Meunier group (industry authors) reported that acetylated HA went deeper into excised human skin samples and withstood hyaluronidase in vitro better than HA of the same molecular weight; no independent study has replicated this.
- “Adheres to the skin better,” “moisturizes longer than HA”: we have not found a published study that directly measured either of these against sodium hyaluronate on human skin.
3. Efficacy evidence: still limited
A PubMed search (November 2026) for the phrase “sodium acetylated hyaluronate” returned only two articles; other names lead mainly to biomedical materials research.
| Study | Test material | Model | Main results (per abstract) | Notes |
|---|---|---|---|---|
| Meunier et al., 2022 | Sodium acetylated hyaluronate | Fibroblasts; excised skin samples, aged or exposed to UV and urban dust; clinical test in volunteers with facial wrinkles | Inhibited MMP gene expression and secretion, protected collagen I; reduced MMPs in skin samples; reduced crow’s-feet wrinkles and “plumped” the nasolabial fold area 6 hours after application; reduced the number of nasolabial fold wrinkles “up to 2 months” (full text: the number of wrinkles was measured on day 28; the 2-month time point measured skin roughness) | The abstract does not state the sample size, concentration or comparison group; 7 of 8 authors are affiliated with one ingredient company |
| Hou et al., 2026 | Sodium acetylated hyaluronate, alone and combined with silybin | In vitro, with and without UV irradiation | Almost no cytotoxicity up to 1%; increased collagen I and III mRNA; did not inhibit MMP-1; the combination with silybin increased total collagen protein | Full text: human skin fibroblasts; industry authors |
| Chen et al., 2023 | Complex of low-molecular-weight sodium hyaluronate and its acetylated derivative | In vitro: normal human fibroblasts, reconstructed skin | The complex increased collagen I synergistically, inhibited MMP-1 and increased two dermal–epidermal junction proteins | The results belong to the complex (full text: acetylated HA alone did not reduce MMP-1); industry authors |
| Saturnino et al., 2014 | Acetylated HA prepared by the research group itself | In vitro: ABTS assay, J774.A1 cells | Bioavailability, free-radical scavenging and activity in reducing inflammatory responses increased compared with free HA | No INCI name stated; full text: bioavailability was measured after simulated digestion (an oral model), not on skin |
Only one study included a test in humans, and it was conducted by industry authors; the rest are laboratory data, with conflicting results on MMPs. Level of evidence: limited; we have not seen an independent trial directly comparing acetylated HA with sodium hyaluronate on human skin.
4. Common concentrations and product types
According to 2023 FDA data compiled in CIR 2023, sodium acetylated hyaluronate appears in 455 formulations: 414 leave-on products and 41 rinse-off products. Frequently used categories are moisturizing products (122), lipsticks (68), face and neck products (63), eye area products (45) and foundations (43).
| Product category (2021 survey) | Maximum reported concentration |
|---|---|
| Leave-on products in general | 0.002–0.1% |
| Face and neck products (not sprayed) | 0.1% |
| Moisturizing products (not sprayed) | 0.0085–0.1% |
| Foundations | 0.002% |
| Rinse-off products | No concentration reported |
A study using HPLC analysis measured acetylated HA in nine lotion products at 7.50–83.3 µg/mL, or about 0.00075–0.0083% (weight/volume) (Shimekake et al., 2023). The cream used in the clinical test by Meunier et al. (2022) contained 0.1–0.2% (full text).
5. How to use and combine
- Apply after cleansing, then use a moisturizer containing emollients to limit water evaporation (general practice with humectants; see the article dry skin and dehydrated skin).
- It can be combined with sodium hyaluronate of several molecular weights; data on complexes such as Chen et al. (2023) exist only from the laboratory so far.
- No checked source reports specific incompatibilities; compatibility should be tested on a small batch.
- Topically applied HA is entirely different from injectable HA fillers, which are a medical procedure performed by a doctor; cosmetics must not imply equivalent effects.
6. Safety — who should take note?
CIR 2023 concluded that seven ingredients of the hyaluronate group, including sodium acetylated hyaluronate, are safe in cosmetics in the practices of use and concentrations described in the report (for airbrush application only: the data are insufficient for an assessment). Data specific to this ingredient: a formulation containing 0.2% sodium acetylated hyaluronate, tested neat in an occlusive repeated insult patch test (HRIPT) in 104 subjects, was not irritating and not sensitizing.
The CIR Expert Panel pointed out the risks of HA material derived from rooster combs (infectious agents, nucleic acids, proteins, endotoxins) and stressed the need to minimize heavy metal impurities. Searching PubMed (November 2026), we found no case reports of allergy specific to acetylated HA. Pregnant or breastfeeding women: data are insufficient; consult a doctor.
7. A brand owner’s perspective
- Ingredient documentation: request a COA stating the molecular weight and degree of acetyl substitution (with the measurement method), fermentation or rooster-comb origin, endotoxin, protein, heavy metals and microbiology.
- Stability: no checked source covers the pH range, incorporation temperature or shelf life of acetylated HA. Because the acetyl bond is an ester bond, formulators should monitor pH and viscosity in stability studies; follow the pH range in the supplier’s technical data sheet (TDS).
- Testing: an HPLC method with fluorescence detection already exists for quantifying acetylated HA in lotions, with a limit of quantification of 200 ng; the viscosity and acid components of the base affect recovery (Shimekake et al., 2023).
- Claims: “moisturizing,” “hydrates the skin” and “helps skin feel soft and smooth” can be used. Avoid “penetrates deeper than HA,” “moisturizes longer than HA,” “stimulates collagen” and “fills wrinkles like injections”; use wrinkle-related statements only when there is a test on the finished product itself.
- ASEAN regulations: a search for “hyalur,” “acetylat” and CAS 9004-61-9 and 9067-32-7 in Annexes II, III and VI (version 2026-1, June 22, 2026) and Annex VII (version 2025-2) of the ASEAN Cosmetic Directive found no entries, so there is no specific concentration limit or label warning.
Butter-C can combine acetylated HA with sodium hyaluronate in contract manufacturing of a hyaluronic acid serum or a moisturizing cream, with concentrations within the range recorded by CIR and claims at the level of hydration.
Frequently asked questions
Is acetylated HA better than regular HA?
There are not enough data to conclude: we have not seen an independent trial directly comparing the two ingredients on human skin.
Does acetylated HA penetrate deeper than HA?
One group of industry authors reported this in excised human skin samples; no independent study has replicated it.
What percentage should be used?
The 2021 industry survey (compiled by CIR) recorded a maximum concentration of 0.1% in leave-on products; the nine lotions analyzed contained about 0.00075–0.0083%.
Can sensitive skin use it?
A formulation containing 0.2% of this ingredient caused no irritation or sensitization in a repeated insult patch test in 104 subjects. People with sensitive skin should still test it first on a small area of skin.
Can pregnant women use it?
Data are insufficient; consult a doctor before use.
References
- Cosmetic Ingredient Review. Safety Assessment of Hyaluronates as Used in Cosmetics (Final Report, released July 7, 2023). https://www.cir-safety.org/sites/default/files/FR_Hyaluronates_062023.pdf
- Meunier M et al. The anti-wrinkles properties of sodium acetylated hyaluronate. J Cosmet Dermatol. 2022. PMID 34708918
- Hou S et al. Combined Effect of Silybin and Sodium Acetylated Hyaluronate on UV-Induced Photoaging. Skin Res Technol. 2026. PMID 42728863
- Chen F et al. Skin antiaging effects of a multiple mechanisms hyaluronan complex. Skin Res Technol. 2023. PMID 37357659
- Saturnino C et al. Acetylated hyaluronic acid: enhanced bioavailability and biological studies. Biomed Res Int. 2014. PMID 25114930
- Shimekake M et al. Analysis of Acetylated Hyaluronic Acid in Moisturizing Lotion and Milk Lotion by HPLC with Fluorescence Detection. Chem Pharm Bull (Tokyo). 2023. PMID 37394608
- NCBI PubChem. Sodium acetylated hyaluronate (SID 472401536). https://pubchem.ncbi.nlm.nih.gov/substance/472401536
BUTTER-C