Polyglyceryl-10 Laurate in cosmetics: emulsifier, solubilizer
Polyglyceryl-10 laurate often appears in toners, cleansing waters, cleansing oils and products presented as “PEG-free”. This article clearly separates what has been measured for this ingredient specifically, what is only data for the whole polyglyceryl ester group according to CIR, and what is still formulation experience — along with a reported case of contact allergy.
Polyglyceryl-10 laurate (INCI: Polyglyceryl-10 Laurate) is an ester of lauric acid (a 12-carbon fatty acid) with polyglycerin-10 and belongs to the group of polyglycerol-based nonionic surfactants. According to the report by CIR (Cosmetic Ingredient Review, United States), its reported functions in cosmetics are emulsifier and skin-conditioning agent; in the literature, it is mainly used to solubilize poorly water-soluble substances and to form oil-in-water emulsions. Data measured specifically for this ingredient are scarce — limited evidence.
1. What is polyglyceryl-10 laurate?
CIR defines this ingredient as “the ester of lauric acid and polyglycerin-10”, CAS 34406-66-1 (generic CAS 74504-64-6). PubChem (ChemIDplus data) lists the same CAS number, 34406-66-1. The molecule has two parts:
- Hydrophilic head: polyglycerin-10, a chain of on average about 10 glycerin units linked by ether bonds, carrying many hydroxyl groups.
- Hydrophobic tail: the laurate group (C12), attached to the hydrophilic head by an ester bond.
The “10” is an average. CIR describes the polymerization of glycerin as producing a distribution of chains of different lengths, mostly linear but also including branched and cyclic forms. Commercial raw materials are not completely pure either: one raw material assessed by the Australian chemicals agency (NICNAS) contained only about 60% Polyglyceryl-10 Laurate, along with about 40% polyglycerin-10 and about 2% sodium laurate (as cited by CIR). Raw materials from different suppliers may therefore differ.
Some INCI names that look similar are different substances, and their data are not interchangeable:
| INCI | How it differs |
|---|---|
| Polyglyceryl-10 Caprylate | Shorter C8 caprylate tail; studied for clear cleansing waters (Zhang 2020) — see the article on PEG-6 caprylic/capric glycerides (in Vietnamese) |
| Polyglyceryl-4 Laurate | Same laurate tail, but the hydrophilic head has only about 4 glycerin units; listed separately by CIR |
| Polyglyceryl-10 Dilaurate, Tetralaurate, Pentalaurate | Two, four or five laurate groups on the same polyglycerin-10 head, more hydrophobic; according to CIR, not reported to be in use |
For a polyglycerol-based emulsifier used in thick creams, see the article on polyglyceryl-3 methylglucose distearate.
2. Role in formulations
CIR notes for the polyglyceryl ester group as a whole: these ingredients are nonionic; their polarity varies with the degree of polymerization of the polyglycerin and the number of fatty acids per hydrophilic head. At low concentrations in water, the polar members of the group self-assemble into micelles. For polyglyceryl-10 laurate, the roles supported by data are:
- Solubilizing poorly water-soluble substances: polyglyceryl-10 laurate increases the water solubility of rosemary extract through micelles (Park 2020).
- Oil-in-water emulsification: decaglycerol monolaurate — the corresponding chemical name (PubChem lists the synonym “dodecanoic acid, monoester with decaglycerol”) — is used as an emulsifier in food emulsions (Ariyaprakai 2026).
- Cleansing oils: in formulation practice, this ingredient belongs to the group of hydrophilic emulsifiers that help a cleansing oil turn milky on contact with water. We have not found any published study measuring polyglyceryl-10 laurate specifically in cleansing oils; the ratio must be finalized by emulsification testing with water for each oil phase. For how to use cleansing oils, see the article on double cleansing.
HLB: the CIR report includes a table of physicochemical properties but gives no HLB value for polyglyceryl-10 laurate. A figure from supplier documents must have its source clearly stated when quoted.
3. Evidence: mainly physicochemical experiments
An exact-name search for “polyglyceryl-10 laurate” on PubMed (November 22, 2026) returned 3 records; adding the chemical names “decaglycerol monolaurate/laurate” gave about 10 records, mostly in the food and pharmaceutical fields. We found no human trials measuring a skin care effect of this ingredient on its own.
| Study | Model | Relevant results |
|---|---|---|
| Ai & Ishitobi, 2006 | Three decaglycerol laurate esters with an average of 1.9, 2.7 and 3.4 laurate groups per molecule, in water and in water–oil systems | The 1.9-group ester formed hexagonal liquid crystals in water; the two more highly esterified, more hydrophobic esters formed lamellar liquid crystals. Phase behavior depended little on temperature but strongly on the proportion of the hydrophilic part and the number of fatty acid residues. The first author is from the laboratory of a chemical company |
| Park et al., 2020 | Solubilization of rosemary extract in water by micelles of four surfactants | Polyglyceryl-10 laurate increased the solubility of the extract; polyglyceryl-10 monooleate was more effective (per the abstract) |
| Ariyaprakai, 2026 | Emulsions with 20% oil and 1–3% polyglycerol esters, stored at −21 and −80 °C | With corn oil and sunflower oil: 3% decaglycerol monolaurate was needed for stable emulsions. With coconut oil (an oil that crystallizes in the cold): only 3% decaglycerol monostearate gave stable emulsions; the monolaurate did not |
Practical implication (inference): the same INCI name may correspond to different degrees of esterification, and Ai (2006) showed that this degree determines the structure formed in water — when changing suppliers, retest clarity and stability.
4. Concentrations
| Source | Context | Level |
|---|---|---|
| CIR 2016, FDA voluntary registration data and industry survey | 52 uses: 43 leave-on, 9 rinse-off | Leave-on up to 6.5% (hair products); rinse-off 0.2–5%; dermal contact 0.0009–2%; baby products 1% |
| NICNAS (cited by CIR) | Raw material with about 60% active content, proposed for use in skin care lotions | ≤3% |
| He 2025 | Eye irritation testing at the typical use level in baby bath products | 3% |
CIR's conclusion applies to “the present practices of use and concentration described in the report”. Formulas using levels higher than those above fall outside the scope that CIR reviewed and require a separate safety assessment.
5. How to use and combine
- pH, temperature: CIR notes that polyglyceryl esters are less stable in the presence of water at high temperatures, and even less stable in the presence of alkaline substances; acids or alkalis cause partial hydrolysis, releasing free fatty acids and polyglycerol. In water-containing products, avoid alkaline pH and prolonged heating; confirm with stability testing.
- Penetration of other ingredients: CIR notes that some polyglyceryl esters may increase the skin penetration of other ingredients; this should be considered when combining them with ingredients whose safety assessment relies on low dermal absorption.
- Replacing ethoxylated surfactants: when switching from polysorbates or PEGs to polyglyceryl esters, clarity and stability must be rescreened — see the article on polysorbate 20 (in Vietnamese).
- Microbial preservation: water-containing products need a preservative system that has been challenge-tested on the finished product.
6. Safety
CIR: the final report (November 14, 2016; published in a journal in 2023) assessed 274 polyglyceryl esters, including Polyglyceryl-10 Laurate, and concluded that these ingredients are safe in the present practices of use and concentration described in the report when formulated to be non-irritating. Data specific to this ingredient in the report:
- Skin: a 5% aqueous solution under a 24-hour occlusive patch on 35 people: non-irritating (unpublished data provided to CIR by industry).
- Eyes: undiluted in rabbit eyes: minimal irritation, with conjunctival irritation fully resolved within 48 hours; for the raw material with about 60% active content, NICNAS noted that it “may be slightly irritating to the human eye”. In the study by He et al. (2025), 3% polyglyceryl-10 laurate (pH 6.0–6.5) did not cause eye irritation in 3 rabbits; three of the ten authors are employees of a company.
- Genotoxicity: the raw material with about 60% active content gave equivocal results without activation and positive results with metabolic activation in a chromosomal aberration test in Chinese hamster cells (V79), but did not cause chromosome breakage in human lymphocytes. CIR summarized these results and still concluded that the group as a whole is safe.
Contact allergy: Washizaki et al. (2008) reported an 80-year-old woman with recurrent itchy erythema for 3 months. According to the summary in the CIR report, she had positive patch tests to polyglyceryl-10 laurate at 0.05–1% in water; after 6 months she was still positive to polyglyceryl-10 laurate from several suppliers and to polyglyceryl-4 laurate and polyglyceryl-6 laurate, while the polyglyceryl-10 esters of myristate, isostearate, stearate and oleate gave negative results. This is a single case, but it shows that allergy can occur, including to other laurate esters.
Comedogenicity: we have not seen published data for this ingredient.
Pregnancy, breastfeeding: data are insufficient; consult a doctor.
7. Notes for brand owners
ASEAN regulations: Polyglyceryl-10 Laurate is not listed in Annexes II, III, VI (version 2026-1 of June 22, 2026) or VII (version 2025-2) of the ASEAN Cosmetic Directive — searched by INCI name, “polyglycer”, “laur”, “dodecano” and CAS 34406-66-1, 74504-64-6.
- Quality: request a certificate of analysis (COA) for each lot; keep the same supplier once stability testing has been done.
- “PEG-free”: true for this ingredient: the hydrophilic part is polyglycerin, usually made by condensing glycerin (CIR), with no polyethylene glycol segment. Zhang et al. (2020; half of the authors are affiliated with a company) gave avoiding 1,4-dioxane impurities, which form during the manufacture of PEG derivatives, as the reason for using polyglycerin instead of PEG. Label a product “PEG-free” only when the whole formula contains no PEG ingredients; do not imply that products containing PEG are less safe.
- Avoid: “plant-based” or “natural” without supplier documentation for the specific lot; “non-allergenic” or “does not sting the eyes” without testing on the finished product; attributing skin-conditioning effects to the surfactant itself.
Butter-C can use polyglyceryl-10 laurate in some PEG-free formulas, such as an olive oil cleansing oil combined with a lipophilic polyglyceryl ester; the ratio is finalized through emulsification testing with water, stability testing and safety assessment of the finished product.
Frequently asked questions
Is polyglyceryl-10 laurate a PEG?
No. The hydrophilic part is polyglycerin (polymerized glycerin), not polyethylene glycol. “PEG-free” does not mean milder; mildness must be tested on the finished product.
Does this ingredient cause irritation or allergy?
A 5% solution was non-irritating to the skin under a 24-hour occlusive patch on 35 people (CIR); one case of contact allergy has been reported (Washizaki 2008). See section 6.
Can it be used around the eyes?
Data in rabbits show low eye irritation (section 6), but products used around the eyes still need eye irritation testing on the finished product.
Does polyglyceryl-10 laurate cause acne?
There are no published comedogenicity data for this ingredient, so no conclusion can be drawn either way.
Can it be used during pregnancy?
There are insufficient human data; consult a doctor.
References
- PubChem. Polyglyceryl-10 laurate, Substance SID 223369294 (ChemIDplus). https://pubchem.ncbi.nlm.nih.gov/substance/223369294
- Fiume MM et al. Safety Assessment of Polyglyceryl Fatty Acid Esters as Used in Cosmetics. Int J Toxicol. 2023. PMID 37279183. Full text of the CIR final report (November 14, 2016): https://www.cir-safety.org/sites/default/files/PGlyFE092016FR.pdf
- Washizaki K et al. A case of allergic contact dermatitis to polyglyceryl laurate. Contact Dermatitis. 2008. PMID 18279173
- He Q et al. From Safety Evaluation to Influencing Factors Analysis: A Comprehensive Investigation on Ocular Irritation of Baby Bath Products. Toxics. 2025. PMID 41304500
- Ai S, Ishitobi M. Effects of the number of fatty acid residues on the phase behaviors of decaglycerol fatty acid esters. J Colloid Interface Sci. 2006. PMID 16256131
- Park S et al. Influences of added surfactants on the water solubility and antibacterial activity of rosemary extract. Food Sci Biotechnol. 2020. PMID 32999744
- Ariyaprakai S. Effects of polyglycerol esters on freeze-thaw stability of emulsions contained crystallized and non-crystallized edible oils. J Food Sci Technol. 2026. PMID 42859481
- Zhang G et al. Synthesis, Characterization, Self-Assembly, and Irritation Studies of Polyglyceryl-10 Caprylates. Polymers (Basel). 2020. PMID 32024256
BUTTER-C