Polyglyceryl-3 Methylglucose Distearate: an O/W cream emulsifier
Polyglyceryl-3 methylglucose distearate is often found in oil-in-water (O/W) moisturizing creams, body lotions and hand creams presented as “PEG-free”. It has been used in many research formulas, but data measured specifically for it are scarce; this article clearly separates what has been measured, what is formulation experience and what has not been verified, including the status of its CIR assessment.
Polyglyceryl-3 methylglucose distearate (INCI: Polyglyceryl-3 Methylglucose Distearate) is a nonionic emulsifier used to make oil-in-water (O/W) emulsions, in which oil droplets are dispersed in a continuous water phase. According to PubChem (ChemIDplus data), its chemical name is “alpha-D-Glucopyranoside, methyl, monoether with triglycerol, dioctadecanoate”, CAS 157175-98-9. Most of the literature uses this ingredient only as an excipient in formulas, so data measured specifically for it are scarce — limited evidence.
1. What is polyglyceryl-3 methylglucose distearate?
The chemical name in PubChem indicates three parts of the molecule:
- Methyl glucoside: a glucose molecule with a methyl group attached through oxygen at carbon C1 (methyl alpha-D-glucopyranoside).
- Triglycerol: three glycerin units linked together (polyglycerin-3), attached to the methyl glucoside by an ether bond.
- Two stearate groups: “dioctadecanoate” refers to two stearic acid residues (stearic acid is a saturated 18-carbon fatty acid) attached by ester bonds.
The methyl glucoside and triglycerol parts are hydrophilic; the two stearate chains are hydrophobic. The chemical name contains no polyethylene glycol (PEG) segment, so this ingredient is not an ethoxylated emulsifier.
Some INCI names that look similar are different substances, and their data are not interchangeable:
| INCI | Difference (per CIR 2016) |
|---|---|
| Methyl Glucose Sesquistearate | A mixture of mono- and diesters of methyl glucoside with stearic acid; no polyglycerin part |
| PEG-20 Methyl Glucose Sesquistearate | Polyethylene glycol ether of the mono- and diesters of methyl glucose and stearic acid, with an average of 20 moles of ethylene oxide; contains PEG |
| PEG-120 Methyl Glucose Dioleate | Polyethylene glycol ether of the diester of methyl glucose and oleic acid, with an average of 120 moles of ethylene oxide; contains PEG |
For a polyglycerol-based emulsifier for water-in-oil (W/O) creams, see the article on polyglyceryl-2 dipolyhydroxystearate.
2. Role in formulations
- O/W emulsification: in a series of skin tests, Jeong et al. (2013) used a simple O/W emulsion whose sole surfactant was polyglyceryl-3 methylglucose distearate at 2.5%, with 0.15% carbomer as a thickener. In many published cream formulas, this ingredient is used together with fatty alcohols or glyceryl stearate (e.g., Olejnik 2018) — see the article on glyceryl stearate (in Vietnamese).
- Cream consistency: Realdon et al. (2002) compared two series of O/W creams with the same base formula, one using ethoxylated cetostearyl alcohol and the other using polyglyceryl-3 methylglucose distearate. At the same surfactant concentration, the creams made with polyglyceryl-3 methylglucose distearate had much higher viscosity, under all processing conditions.
- HLB: we did not find an HLB value for this ingredient in the PubMed/PMC sources we read. A figure in a supplier's technical documents is the supplier's description, and its source should be stated when quoted.
- Lamellar liquid crystals: we have not been able to read any study that specifically measures a liquid crystal structure formed by this ingredient. In the liquid crystal emulsion study by Hua et al. (2024), this ingredient made up only 0.1%; the authors attributed the role of stabilizing the lamellar structure to glyceryl stearate citrate and cetearyl alcohol, while molecular simulation showed no appreciable change for polyglyceryl-3 methylglucose distearate. Six of the 11 authors are employees of a cosmetics company.
3. Evidence: mainly formulation experiments
An exact-name search for “polyglyceryl-3 methylglucose distearate” on PubMed (November 19, 2026) returned only 3 records; a full-text search on PMC returned 23 articles, most of which only list this ingredient in a formula, and many of which concern drug-carrying lipid nanoparticles. We found no human trials measuring the effect of this ingredient on its own.
| Study | Model | Relevant results |
|---|---|---|
| Realdon et al., 2002 | O/W creams made at three levels of mixing energy: hand-held mixer, high-speed stirrer, vacuum emulsifier | The higher the mixing energy, the finer the dispersed oil droplets. With ethoxylated cetostearyl alcohol, viscosity increased with mixing energy; with polyglyceryl-3 methylglucose distearate it was the opposite, viscosity decreased. Differences between batches made under the same processing conditions were not statistically significant |
| Jeong et al., 2013 | 177 Korean volunteers aged 20–35; stratum corneum hydration measured by capacitance (corneometer) on the forearm over 6 hours | The study's base emulsion used 2.5% polyglyceryl-3 methylglucose distearate as the surfactant. In the comparison of 10 surfactant systems (each at 1.5%, including the ingredient in this article, with 20% oil and 3% cetearyl alcohol), no statistically significant differences in hydration were found between the systems. The authors are affiliated with and funded by a cosmetics company |
| Olejnik et al., 2018 | O/W cream: 4.5% of the ingredient in this article, 3.5% cetearyl alcohol, 3.5% glyceryl stearate, 10.5% ethylhexyl stearate; monitored for 60 days at 4, 25 and 37 °C by light scattering | No phase separation on centrifugation; no creaming or sedimentation observed over 60 days. The droplet size distribution was broad (5–500 µm), with aggregates; less stable than an emulsion made with a self-emulsifying polymer in the same study |
Practical implication: the consistency of creams made with this ingredient depends on both the formula and the equipment and mixing speed. Results from small laboratory batches need to be rechecked when moving to production equipment.
4. Concentrations
| Source | System | Use level |
|---|---|---|
| Jeong 2013 | Simple O/W emulsion, single surfactant | 2.5% |
| Bîrsan 2026 | O/W cream, combined with 3% cetyl palmitate and 3% stearic acid | 3.5% |
| Olejnik 2018 | O/W cream, combined with cetearyl alcohol and glyceryl stearate | 4.5% |
| Hua 2024 | Liquid crystal emulsion with multiple emulsifiers | 0.1% (minor component) |
| Butter-C in-house prototype formulas | Body creams, hand creams, body butters containing water | 2–4% (formulation experience) |
These are use levels in published formulas and in-house prototype formulas, not safety limits. We have not been able to read a concentration-of-use table published by CIR for this ingredient (see section 6).
5. How to use and combine
- Phase of addition: add to the oil phase. In Olejnik's study, the oil phase (including the emulsifier) and the water phase were both heated to 70 °C; the water phase was mixed into the oil phase, stirred and cooled to 50 °C, then homogenized and further cooled to 30 °C.
- Co-emulsifiers: fatty alcohols and glyceryl stearate help build the “body” of the cream; it can be compared with other PEG-free systems such as cetearyl olivate (in Vietnamese), or with ethoxylated systems such as ceteareth-25 (in Vietnamese).
- Process: because viscosity changes with mixing energy (Realdon 2002), keep the speed, homogenization time and cooling temperature fixed; viscosity must be remeasured when scaling up the batch size.
- pH, electrolytes: we have not been able to read published data on the stable pH range or salt tolerance of this ingredient; stability should be tested at the target pH of the formula.
- Microbial preservation: O/W creams contain water, so they need a preservative system and a preservative efficacy (challenge) test on the finished product.
6. Safety
CIR (Cosmetic Ingredient Review, United States): we have not been able to confirm any CIR report that names this ingredient.
- The CIR report on methyl glucose polyethers and esters (Johnson 2016) concluded that the 25 ingredients in the group are safe in the present practices of use and concentration. We have read the full text: the list of 25 ingredients does not include Polyglyceryl-3 Methylglucose Distearate.
- The CIR report on polyglyceryl fatty acid esters (Fiume 2023) assessed 274 esters and concluded that these ingredients are safe in the present practices of use and concentration described in the report when formulated to be non-irritating. We have read only the abstract and have not confirmed that the ingredient in this article is on the list of 274 substances, so we do not apply this conclusion to it.
Allergy, irritation: in a PubMed search (November 19, 2026), we found no case reports of contact allergy caused by this ingredient, and we have not been able to read irritation or sensitization test data for this ingredient on its own. The absence of reports does not mean it is “non-allergenic”.
Pregnancy, breastfeeding: data are insufficient; consult a doctor.
7. Notes for brand owners
ASEAN regulations: Polyglyceryl-3 Methylglucose Distearate is not listed in Annexes II, III, VI (version 2026-1 of June 22, 2026) or VII (version 2025-2) of the ASEAN Cosmetic Directive — searched by INCI name, “polyglycer”, “methylglucos”, “methyl glucos” and CAS 157175-98-9.
- Quality: request a certificate of analysis (COA) for each lot and documentation on the source of the starting materials (stearic acid, glycerin, glucose).
- Appropriate claims: “oil-in-water emulsion cream”; “PEG-free” only when the whole formula contains no PEG ingredients.
- Avoid: “plant-based” or “natural” without supplier documentation for the specific lot of the ingredient; “non-allergenic” or “non-comedogenic” without testing on the finished product; attributing a moisturizing effect to the emulsifier itself.
Butter-C can use polyglyceryl-3 methylglucose distearate as the emulsifier in some PEG-free cream formulas, such as a PEG-free version of the rice bran body lotion; the ratio is finalized by stability testing on small batches and then rechecked on production equipment.
Frequently asked questions
Is polyglyceryl-3 methylglucose distearate a PEG?
No. The chemical name in PubChem includes only methyl glucoside, triglycerol and stearic acid, with no polyethylene glycol segment. Do not confuse it with PEG-20 Methyl Glucose Sesquistearate, a substance that does contain PEG.
Does this ingredient help a cream moisturize better?
There are no data showing that. In Jeong's study (2013), changing the surfactant in an O/W emulsion did not produce a statistically significant difference in skin hydration measured over 6 hours; statistically significant differences between samples were seen only in the humectant group, where glycerin and urea increased hydration more markedly than the other humectants.
Is this ingredient plant-based?
The INCI name does not indicate its origin. Stearic acid and glycerin can come from many sources; stating “plant-based” requires documentation from the supplier.
Does polyglyceryl-3 methylglucose distearate cause acne?
We have not seen published comedogenicity data for this ingredient, so no conclusion can be drawn either way.
Can it be used during pregnancy?
There are insufficient human data; consult a doctor.
References
- PubChem. Polyglyceryl-3 methylglucose distearate, Substance SID 433770530 (ChemIDplus). https://pubchem.ncbi.nlm.nih.gov/substance/433770530
- Johnson W Jr et al. Safety Assessment of Methyl Glucose Polyethers and Esters as Used in Cosmetics. Int J Toxicol. 2016. PMID 27913771
- Fiume MM et al. Safety Assessment of Polyglyceryl Fatty Acid Esters as Used in Cosmetics. Int J Toxicol. 2023. PMID 37279183
- Realdon N et al. Influence of processing conditions in the manufacture of O/W creams: I. Effect on dispersion grade and rheological characteristics. Farmaco. 2002. PMID 12058807
- Jeong CB et al. Analysis of electrical property changes of skin by oil-in-water emulsion components. Int J Cosmet Sci. 2013. PMID 23621673
- Olejnik A et al. Release studies of undecylenoyl phenylalanine from topical formulations. Saudi Pharm J. 2018. PMID 29991915
- Bîrsan M et al. A New Cosmeceutical Approach for Mature Skin: Antioxidant Activity, In Vitro Permeation, and Preliminary Clinical Efficacy of Melatonin-N-Acetylcysteine Creams. Antioxidants (Basel). 2026. PMID 42650255
- Hua Z et al. Ultra-micro Liquid Crystal in Cosmetic Emulsion with Excellent Moisture Retention and Delivery Selectivity. ACS Omega. 2024. PMID 39619544
BUTTER-C