Cosmetic ingredients

22/11/2026 9 min read

Disodium Cocoyl Glutamate in cosmetics: pH, mildness

Disodium Cocoyl Glutamate and Sodium Cocoyl Glutamate share the same coconut fatty acid – glutamic acid backbone, but they are two salts with two INCI names. This article sets out the differences that are actually backed by data: the degree of neutralization, the pH of the raw material, the irritation tests performed specifically on the disodium salt, and where evidence is still lacking.

Disodium Cocoyl Glutamate in cosmetics: pH, mildness
Close-up of foam made of many large and small bubbles under blue light — an illustration of cleanser foam; the image does not indicate the type of foaming agent

Disodium cocoyl glutamate (INCI: Disodium Cocoyl Glutamate; CAS 68187-30-4) is an anionic acyl amino acid surfactant: glutamic acid is linked to coconut oil fatty acid groups via an amide bond, and both carboxyl groups of the glutamic acid are in the sodium salt form. It is used as a cleansing and foaming agent in “sulfate-free” facial cleansers and body washes. The CIR Expert Panel (United States) places it in a group of 115 amino acid alkyl amides and concluded that this group is safe in the present practices of use and concentration when formulated to be non-irritating (Burnett et al., 2017).

What the glutamate family has in common — how it is synthesized, precipitation when the pH is lowered, difficulty thickening with salt, CIR’s concentration survey table — is covered in the article on sodium cocoyl glutamate (in Vietnamese). This article covers only what is specific to the disodium salt.

1. What is disodium cocoyl glutamate?

“Cocoyl” is a mixture of fatty acid groups from coconut oil, so this ingredient has no single fixed molecular formula. On PubChem, CAS 68187-30-4 is recorded as “L-Glutamic acid, N-coco acyl derivs., disodium salts”, while CAS 68187-32-6 is “… monosodium salts” — that is, the monosodium salt. The representative C12 record is disodium lauroyl glutamate (PubChem CID 11337766; C17H29NNa2O5; 373.4 g/mol), whose IUPAC name takes the “pentanedioate” form: both acid ends are carboxylates. Some PubChem records mistakenly link these two CAS numbers to sodium glutamate (which has no fatty acid group).

In the laboratory, the disodium salt is made by neutralizing N-dodecanoylglutamic acid with sodium hydroxide at a 1 : 2 molar ratio (Ichihara et al., 2021).

2. Monosodium or disodium: how do they differ?

CharacteristicSodium Cocoyl GlutamateDisodium Cocoyl Glutamate
CAS (PubChem)68187-32-6 (monosodium salts)68187-30-4 (disodium salts)
Representative C12 recordCID 23668603; C17H30NNaO5; 351.4 g/mol; one carboxyl group still in the acid formCID 11337766; C17H29NNa2O5; 373.4 g/mol; two carboxylate groups
Degree of neutralization1 mol NaOH per 1 mol acid (derived from the formula)2 mol NaOH per 1 mol acid (Ichihara et al., 2021)
Published raw-material pHNot found in the sources reviewedOne commercial sample with 29% active content: pH 8.85 when diluted to 10% active content in distilled water (Zhang et al., 2026)

Implications for formulation — this is chemical inference and needs to be tested on small batches:

  • The raw-material pH is not “mildly acidic”. The disodium salt of a weak acid gives a mildly alkaline solution, as in the sample measured at pH 8.85; bringing the finished product into the mildly acidic range requires adding acid — more than when the monosodium salt is used.
  • The INCI name describes the starting raw material. When the pH is lowered, some of the carboxylate groups take up a proton again; at the finished-product pH, the substance in the bottle is no longer entirely in the “disodium” form. Adjusted to the same pH, the two salts give the same acyl glutamate form, but the amount of salt generated during pH adjustment differs.
  • Not a 1 : 1 substitution by weight. Switching from one salt to the other requires recalculating based on the % active content on the COA and rerunning the pH – clarity – viscosity curve.

No published data have been found directly comparing solubility, foam or the pH – clarity curve of the two salts (PubMed, Europe PMC, November 22, 2026).

3. Data generated specifically on the disodium salt

SourceModelResults and caveats
He et al., 2025 (3 of 10 authors employed by a company)Draize eye irritation test in rabbits (3 animals per sample): 4.5% and 8% solutions (from the same raw-material source), pH 6.0–6.5; and 5% SLES with 3% of this ingredient added, pH 5.5–6.0. Also a short time exposure test on rabbit corneal cells (SIRC)4.5% and 8% solutions: non-irritating. Added to 5% SLES: the irritation rating rose from “slight” to “mild” (5-level scale: non-irritating – slight – mild – irritating – corrosive); on SIRC, cell viability was 39% versus 50% for SLES alone. Figures taken from the full text; the two compared samples had different pH values
Zhang et al., 2026 (all 4 authors affiliated with companies)In vitro: normal HaCaT keratinocytes and HaCaT overexpressing the TRPV1 receptor (associated with stinging sensations), 26 surfactants, concentrations up to 0.01% active contentDid not trigger Ca2+ influx in either cell type; SLES and cocamidopropyl betaine did. A cell model only
Xu et al., 2026 (2 of 5 authors from a cosmetics group)HET-CAM and molecular dynamics simulation: this ingredient alone, mixed with sodium lauroyl aspartate + rhamnolipid, and that mixture with added cocamidopropyl betaineSystems with a lower CMC formed larger aggregates and were less irritating in HET-CAM; the mixture containing betaine affected the model lipid layer the least of the three systems
Weber et al., 2019 (1 of 4 authors from a company)21 people with normal to oily skin, 15-day half-forehead comparison: a facial cleanser containing this ingredient together with hop and willow bark extracts, versus an SLES facial cleanserNeither product caused skin redness as measured. The results belong to the whole formula
Schepky et al., 2004 (first author from a cosmetics company)Ex vivo: measurement of stratum corneum tryptic enzyme after repeated washing in humans; an SLES/betaine/disodium cocoyl glutamate body wash versus a marketed SLES/betaine body washResidual enzyme activity was significantly higher with the glutamate-containing formula. The abstract does not state the number of participants; the results belong to the formula

Conclusion: limited evidence. There are no human trials with this ingredient on its own, and no patch test series including the disodium salt has been found (the 105-patient patch test study that is often cited concerns the monosodium salt). The He et al. data show that adding an “amino acid-based” ingredient does not necessarily reduce irritation; the authors also noted that the same ingredient from different sources gave different results.

4. Use in facial cleansers, body washes and shampoos

  • Use level: there is no standard level. He et al. tested 4.5% and 8% as actual use levels in baby bath products (without stating whether these are based on active content or on raw material). For the concentrations reported in the CIR survey, see the sodium cocoyl glutamate article — they are not recommendations.
  • Gel and foam facial cleansers: often combined with cocamidopropyl betaine (in Vietnamese); in the Xu et al. model, the mixture containing betaine gave more stable, more tightly packed aggregates. This is the second, water-based step of double cleansing.
  • α-gel creams: disodium lauroyl glutamate together with a C16 fatty alcohol and water forms an α-gel (a hydrated lamellar layer). As NaCl was increased from 0 to 200 mmol/dm³, the viscosity of the α-gel decreased; from 200 to 1,000 mmol/dm³, the viscosity increased again; once broken, the structure was difficult to restore (Ichihara et al., 2021). Implication for cream cleansers (inference, not tested in cleansing products): the amount of salt, including salt generated during pH adjustment, changes the cream texture in both directions.
  • Body washes: in the study cited, this ingredient was combined with SLES and betaine (Schepky et al., 2004).
  • Shampoos: no published studies on shampoos containing the disodium salt have been found; if it is used, test foam, viscosity, clarity and eye irritation.

For an overview of the groups of foaming agents, see the article on classifying foaming agents (in Vietnamese).

5. Safety and ASEAN regulations

CIR. CIR’s public Quick Reference Table (September 2020) lists Disodium Cocoyl Glutamate as “SQ” — safe with qualifications: “safe in the present practices of use and concentration in cosmetics, when formulated to be non-irritating”, citing IJT 36(Suppl. 1):17-56, 2017. The report abstract states that the irritation and sensitization data for the two ingredients with the highest use concentrations (lauroyl lysine, sodium lauroyl glutamate) were judged sufficient to support the safety of the whole group — these are not data specific to the disodium salt.

Eyes. The 4.5% and 8% solutions were not irritating to rabbit eyes, but adding 3% to 5% SLES raised the irritation rating (He et al., 2025). Facial cleansers and children’s products need eye irritation testing on the finished product itself.

Contact allergy. A PubMed search for “disodium cocoyl glutamate” (November 22, 2026) returned 4 articles, none of which was an allergy case report; this does not rule out the possibility of allergy. A case of allergy to a related ingredient (sodium stearoyl glutamate) is described in the sodium cocoyl glutamate article. Skin that is inflamed, damaged or has previously reacted allergically to foaming agents: consult a dermatologist. Pregnant or breastfeeding women: data are insufficient; consult a doctor.

ASEAN. We searched Annexes II, III, VI (version 2026-1, June 22, 2026) and VII (version 2025-2, December 12, 2025) of the ASEAN Cosmetic Directive for “glutam”, “cocoyl” and CAS 68187-30-4: there is no entry for Disodium Cocoyl Glutamate. The string “glutam” appears only in Annex III, Ref 24 (water-soluble zinc salts, including zinc glutamate; maximum 1% calculated as zinc) — a different substance. If the pH is adjusted with triethanolamine, the conditions of Annex III, Ref 62 (trialkylamines, trialkanolamines and their salts) apply.

6. Perspective for brand owners

  • Label: state the salt exactly as on the COA — “Disodium Cocoyl Glutamate” is not the same as “Sodium Cocoyl Glutamate”.
  • Raw material: calculate based on % active content; ask for the pH, salt content and accompanying substances of the actual lot.
  • pH: the raw material is mildly alkaline; the finished-product pH is determined by the formula. Do not state “pH close to the skin’s” unless it has been measured on the finished product.
  • Claims: “cleansing”, “foaming”, “sulfate-free” and “amino acid-based cleanser” describe the composition; “gentle”, “suitable for sensitive skin” and “does not sting the eyes” should be used only after testing on the finished product.

Butter-C’s current ingredient portfolio includes the disodium salt; when manufacturing an amino acid facial cleanser, pH, clarity, viscosity and tolerability are checked on the actual formula.

Frequently asked questions

Can disodium cocoyl glutamate and sodium cocoyl glutamate replace each other?

They belong to the same family but are two salts with two INCI names. Switching salts requires recalculating based on % active content, readjusting pH and viscosity, and updating the label.

Is the disodium salt milder than the monosodium salt?

No direct comparison has been published; mildness needs to be tested on the finished product.

Does disodium cocoyl glutamate have a mildly acidic pH, close to the skin’s pH?

No. One raw material sample measured pH 8.85 at 10% active content. A “skin-close” pH in a facial cleanser, if any, comes from adjustment within the formula.

Can it be used in children’s bath and shampoo products?

Possibly, if the finished product passes eye irritation testing and a safety assessment. Data in rabbits show that the results change when it is combined with other foaming agents.

References

  1. Burnett CL et al. Safety Assessment of Amino Acid Alkyl Amides as Used in Cosmetics. Int J Toxicol. 2017. PMID 28553738
  2. Cosmetic Ingredient Review. Quick Reference Table (09/2020), Disodium Cocoyl Glutamate entry. https://www.cir-safety.org/sites/default/files/sq-fix_2.pdf
  3. He Q et al. From Safety Evaluation to Influencing Factors Analysis: A Comprehensive Investigation on Ocular Irritation of Baby Bath Products. Toxics. 2025. PMID 41304500
  4. Zhang C et al. The Role of TRPV1 Channel in Cosmetic Safety Evaluation. ACS Omega. 2026. PMID 41552596
  5. Xu J et al. Microscopic Dynamic Mechanisms of Surfactant-Induced Skin Irritation. J Phys Chem B. 2026. PMID 42915330
  6. Weber N et al. Effect of a botanical cleansing lotion on skin sebum and erythema of the face: A randomized controlled blinded half-side comparison. J Cosmet Dermatol. 2019. PMID 30022595
  7. Schepky AG et al. Influence of cleansing on stratum corneum tryptic enzyme in human skin. Int J Cosmet Sci. 2004. PMID 18492137
  8. Ichihara K et al. Rheology of α-Gel Formed by Amino Acid-Based Surfactant with Long-Chain Alcohol: Effects of Inorganic Salt Concentration. Langmuir. 2021. PMID 34082534

Get started

Talk to us about the product you plan to launch

Please send us your product direction and expected quantities. Our team will get back to you during business hours.

Công ty cổ phần Dược mỹ phẩm Butter-C · Business registration no. 0108681386 (Hanoi Department of Planning and Investment, 03/04/2019)
Head office: Huu Le village, Dai Thanh commune, Hanoi · Factory: Thanh Oai Industrial Cluster, Binh Minh commune, Hanoi, Vietnam
Hotline 0967 176 511 · [email protected] · privacy policy
Product catalog →