Cosmetic ingredients

22/11/2026 9 min read

Isohexadecane in cosmetics: C16 isoparaffin, safety and cautions

Isohexadecane is a branched-chain hydrocarbon oil that gives moisturizers, sunscreens and two-phase makeup removers a light feel. Safety data are generally favorable, but the ingredient carries an aspiration hazard warning if swallowed, and concentration figures specific to it currently come only from the CIR draft report.

Isohexadecane in cosmetics: C16 isoparaffin, safety and cautions
An open wooden box holding round cotton makeup remover pads beside a sprig of dried grass — illustrating the makeup removal step, where isohexadecane often forms the oil layer of two-phase makeup removers

Isohexadecane (INCI: Isohexadecane) is a saturated, branched-chain, 16-carbon liquid hydrocarbon used in cosmetics as an emollient and solvent. Its representative component is usually given as 2,2,4,4,6,8,8-heptamethylnonane. Isohexadecane is found in moisturizers, makeup, cleansing products and conditioners, and is often chosen for the oil layer of two-phase makeup removers (formulation experience).

1. What is isohexadecane?

According to the 2022 screening assessment by Environment and Climate Change Canada and Health Canada, the name “isohexadecane” is a generic term for saturated, branched hydrocarbons with 16 carbons (citing CIR 2012). The substance assessed by Canada is 2,2,4,4,6,8,8-heptamethylnonane (abbreviated HMN), CAS 4390-04-9. PubChem (CID 20414) gives HMN the formula C16H34 and a molecular weight of 226.44 g/mol. The Canadian report describes HMN as a highly branched hydrocarbon that is not known to occur naturally and that can be produced by alkylation of short-chain alkanes followed by isomerization. The CIR draft final report (Expert Panel meeting document, December 2010, on cir-safety.org; hereafter: CIR draft 2010) lists three CAS numbers for this INCI (4390-04-9, 60908-77-2, 93685-80-4) and describes one form of the ingredient as a mixture of highly branched C16 isoparaffins with small amounts of C12 and C20 paraffins.

Isohexadecane belongs to the same isoparaffin group as isododecane (in Vietnamese; C12) but has a longer chain. It differs from squalane (in Vietnamese; a C30 hydrocarbon) and from mineral oil, which is a mixture of hydrocarbons refined from petroleum (see mineral oil (in Vietnamese)).

The Canadian report uses isododecane as an analogue to infer some toxicity data, and tabulates a comparison of the two substances:

Parameter (Canada 2022, Appendix B)IsododecaneIsohexadecane (HMN)
Molecular weight (g/mol)170226
Boiling point (°C)178240
Water solubility (mg/L)4.86×10−32.05×10−3 (modeled)
log Kow6.967.79 (modeled)

2. Role in formulations

According to Canada (citing CIR 2012) and the CIR summary, its main functions are solvent and skin-conditioning agent – emollient. In Canada, HMN is present in thousands of cosmetics notified to Health Canada, most commonly moisturizers, makeup, cleansing products and conditioners. HMN is also a non-medicinal ingredient in natural health products and non-prescription drugs, commonly skin creams and sunscreens.

Product typeRole of isohexadecaneSource
Creams, moisturizing lotionsEmollient; influences emulsion structure and feel during spreadingCanada 2022; Terescenco et al., 2018
Makeup, sunscreenSolvent, emollient in the oil phaseCanada 2022
Cleansing products, two-phase makeup removerLight oil that dissolves makeupCanada 2022 (cleansing products); two-phase format: formulation experience
Gels and gel creams made with pre-dispersed thickening polymersOil phase carrying the polymerBonacucina et al., 2009

Bonacucina et al. (2009) studied a thickening ingredient consisting of acrylamide/sodium acryloyldimethyl taurate copolymer concentrated and dispersed in isohexadecane. Isohexadecane may therefore appear on the label even when the formulator did not deliberately add it — the full INCI composition of blended raw materials is needed when preparing the label (labeling practice).

3. Skin feel and emulsion structure

Terescenco et al. (2018; two co-authors are from an excipient manufacturer) compared two lamellar liquid crystal emulsions that differed only in the emollient: isohexadecane produced an α-gel structure, while caprylic/capric triglyceride produced a lamellar phase close to α-gel. For difficulty of spreading (sensory panel), the emulsion first breaks and the droplets roll over one another; the emollient then comes into direct contact with the skin, and nonpolar substances spread more easily than polar ones.

Implication: changing the emollient can also change the emulsion structure; when replacing an ester with isohexadecane or vice versa, viscosity and stability need to be measured again (formulation experience). In eye and lip makeup removers, some formulas combine isohexadecane with isododecane so that the oil layer stays longer before evaporating (formulation experience).

4. Efficacy evidence: limited

Searching PubMed on November 22, 2026 (keywords isohexadecane, heptamethylnonane), we found no clinical trial measuring the effect of isohexadecane alone on the skin; there are only formulation, sensory, in vitro diffusion and nanoemulsion studies. This is limited evidence. Claims such as “removes makeup thoroughly” and “non-greasy” belong to the whole formula and must be substantiated on the finished product.

5. Concentration: what is known and what is not

The abstract of the CIR report (2012) gives a concentration range of up to 90% for the isoparaffins (the lower bound is printed as “0001%”; Canada cites it as 0.0001%). This is the range for the whole group, not a figure specific to isohexadecane and not a recommended level: according to the CIR draft 2010, the lowest level belongs to C13-14 isoparaffin and the highest to isododecane. For isohexadecane specifically, the draft records 596 uses in voluntary registrations with the FDA in 2010 and reported concentrations of 0.2–42% (2010 industry survey); this has not yet been checked against the 2012 published version. No official recommended use level was found in the sources we read; the actual percentage is determined by the sensory profile, stability and the safety assessment of the finished product.

6. Safety: who should take care

CIR conclusion (2012): the isoparaffins in the report, including isohexadecane (according to Canada 2022 and the CIR draft 2010), are safe in the present practices of use and concentration described in the report.

  • Canadian assessment (2022): HMN is considered to have low hazard potential for humans, because no genotoxic, reproductive or developmental effects, or other adverse effects relevant to humans, were seen at doses up to 1,000 mg/kg/day (oral study on HMN) and up to 1,393 mg/m³ (inhalation study on the analogue isododecane). Increased liver weight and hepatocellular hypertrophy in rats dosed orally from 300 mg/kg/day were considered adaptive and resolved after recovery; kidney damage in male rats (via the α2u-globulin protein) is not relevant to humans.
  • Skin irritation: Mullin et al. (1990; authors from a chemical company) reviewed data on isoparaffins of about C10–C15 (close to, but not the same as, isohexadecane, C16): mild to moderate irritation under occlusion, where the substance cannot evaporate; no irritation in non-occluded tests; no sensitization in guinea pigs or humans, although rare idiosyncratic sensitization reactions occurred.
  • Data specific to isohexadecane (CIR draft 2010, mainly unpublished industry data): repeated patch tests in healthy people with products containing 15–42% isohexadecane, including a 15% facial cleanser in 600 people and a 20% eye makeup remover in 102 people, showed no irritation or sensitization. Repeated open application tests with undiluted isohexadecane: positive in 2/26 people with dermatitis and 11/55 healthy people (the difference was not statistically significant), which the authors considered nonspecific irritation; at 10% in petrolatum there were no reactions.
  • Allergy: there is one case report of allergic contact dermatitis to isohexadecane and isopropyl myristate (Bharati and King, 2004; no abstract on PubMed). As summarized in the CIR draft 2010: a 64-year-old woman developed an eczematous rash after using a sunscreen product containing isohexadecane; a patch test with 10% isohexadecane was positive on days 2 and 4, and 20 controls were negative.
  • Accidental swallowing, aspiration: on PubChem, of the 202 reports that include hazard codes (227 classification reports submitted to ECHA in total), 89% list H304 — may be fatal if swallowed and enters airways. Mullin et al. also state that inhaling liquid isoparaffins into the lungs when swallowed can cause severe lung damage. For cleansing oils and two-phase makeup removers: keep out of reach of children (the same principle as for mineral oil).
  • Comedogenicity: the CIR draft 2010 records that isohexadecane was non-comedogenic in the rabbit ear (an animal model); there are no human data, so there is not enough basis to state “does not cause acne”.

Who should take care: people who have been allergic to a product containing isohexadecane, and people whose skin is currently damaged. Pregnant or breastfeeding women: there are not enough data on cosmetic use; consult a doctor.

7. Perspective for brand owners (B2B)

  • ASEAN: Annexes II, III, VI (version 2026-1, June 22, 2026) and VII (version 2025-2) of the ASEAN Cosmetic Directive were searched for isohexadecane, heptamethylnonane and CAS 4390-04-9: not listed in the annexes, meaning there is no specific concentration limit.
  • Products exported to the United States: 16 CFR 1700.14(a)(32) requires child-resistant packaging for nonemulsion-type liquid cosmetics and drugs that contain 10% or more hydrocarbons by weight and have a viscosity of less than 100 SUS at 100 °F; exempt are packages from which the product can be dispensed only through a spray device (pumps or trigger sprays that are permanently attached or child-resistant) and products whose liquid is not free-flowing, such as makeup remover pads. Hydrocarbons (substances consisting only of carbon and hydrogen, such as isohexadecane) of all types in the formula are added together; two-phase makeup removers and cleansing oils should be checked against this rule, with viscosity measured on the finished product.
  • Claims: “lightweight texture” and “helps dissolve makeup” can be used once tested on the finished product. Avoid “does not cause acne”, “natural”, “plant-based” (Canada: HMN is not known to occur naturally) and “safe for everyone”.
  • Documentation: keep the SDS and COA in the Product Information File; include the risk of accidental swallowing by children in the safety assessment and label warnings.

Butter-C can use isohexadecane in contract-manufactured two-phase makeup removers, moisturizers and sunscreens, with stability and sensory testing and packaging requirements according to the target market. For makeup removal habits, see also the article on double cleansing.

Frequently asked questions

Is isohexadecane a silicone?

No. Isohexadecane is a hydrocarbon (consisting only of carbon and hydrogen); silicones have a silicon–oxygen backbone.

Does isohexadecane cause acne?

There are no human data; the CIR draft 2010 only records that it was non-comedogenic in the rabbit ear. A claim requires testing on the finished product.

How does isohexadecane differ from isododecane?

Both are isoparaffins; isohexadecane has 16 carbons and a boiling point of about 240 °C, compared with 178 °C for isododecane (Canadian data), so it is predicted to evaporate more slowly and leave an oil film for longer.

Is isohexadecane safe?

CIR (2012) concluded that it is safe in the present practices of use; Canada (2022) considered HMN to pose a low risk to human health. The main caution: the risk of aspiration if a child swallows a liquid product.

Can pregnant women use it?

There are not enough data for pregnancy; consult a doctor.

References

  1. Johnson W Jr et al. Safety assessment of isoparaffins as used in cosmetics. Int J Toxicol. 2012. PMID 23283704 · Draft final report (CIR Expert Panel meeting document, December 13–14, 2010): https://www.cir-safety.org/sites/default/files/117_final_isopar.pdf
  2. Environment and Climate Change Canada, Health Canada. Screening assessment — Nonane, 2,2,4,4,6,8,8-heptamethyl- (heptamethylnonane). 2022. https://www.canada.ca/en/environment-climate-change/services/evaluating-existing-substances/screening-assessment-heptamethylnonane.html
  3. National Library of Medicine. PubChem — 2,2,4,4,6,8,8-Heptamethylnonane (CID 20414), including aggregated GHS classifications from notifications submitted to ECHA. https://pubchem.ncbi.nlm.nih.gov/compound/20414
  4. Terescenco D et al. Influence of the emollient on emulsions containing lamellar liquid crystals: from molecular organization towards applicative properties. Int J Cosmet Sci. 2018. PMID 30303546
  5. Bonacucina G et al. Characterization and stability of emulsion gels based on acrylamide/sodium acryloyldimethyl taurate copolymer. AAPS PharmSciTech. 2009. PMID 19340587
  6. Mullin LS et al. Toxicology update isoparaffinic hydrocarbons: a summary of physical properties, toxicity studies and human exposure data. J Appl Toxicol. 1990. PMID 2193978
  7. Bharati A, King CM. Allergic contact dermatitis from isohexadecane and isopropyl myristate. Contact Dermatitis. 2004. PMID 15186389
  8. U.S. Consumer Product Safety Commission. 16 CFR 1700.14 — Substances requiring special packaging (Code of Federal Regulations, edition of January 1, 2025). https://www.govinfo.gov/content/pkg/CFR-2025-title16-vol2/pdf/CFR-2025-title16-vol2-sec1700-14.pdf

Get started

Talk to us about the product you plan to launch

Please send us your product direction and expected quantities. Our team will get back to you during business hours.

Công ty cổ phần Dược mỹ phẩm Butter-C · Business registration no. 0108681386 (Hanoi Department of Planning and Investment, 03/04/2019)
Head office: Huu Le village, Dai Thanh commune, Hanoi · Factory: Thanh Oai Industrial Cluster, Binh Minh commune, Hanoi, Vietnam
Hotline 0967 176 511 · [email protected] · privacy policy
Product catalog →