Cosmetic ingredients

22/11/2026 10 min read

Polyglyceryl-4 Oleate in cosmetics: lipophilic emulsifier

Polyglyceryl-4 oleate may be found in cleansing oils, cleansing balms and emulsions presented as “PEG-free”, usually paired with a more hydrophilic emulsifier. This article clearly separates what has been measured for this ingredient specifically, what is only data for the whole polyglyceryl ester group according to CIR, and what is still formulation experience.

Polyglyceryl-4 Oleate in cosmetics: lipophilic emulsifier
Close-up of round oil droplets of various sizes floating on water under warm yellow light — an illustration of oil and water, which an emulsifier helps to mix; not a product photo

Polyglyceryl-4 oleate (INCI: Polyglyceryl-4 Oleate) is an ester of oleic acid (an 18-carbon fatty acid with one double bond) with polyglycerin-4 and belongs to the group of polyglycerol-based nonionic surfactants. The report by CIR (Cosmetic Ingredient Review, United States) lists its functions in cosmetics as emollient (a skin-conditioning agent) and emulsifier. In the literature, this ingredient is described as a lipophilic surfactant and has been studied as a co-emulsifier alongside the more hydrophilic polyglyceryl-4 laurate. Data measured specifically for this ingredient are very scarce — limited evidence.

1. What is polyglyceryl-4 oleate?

CIR defines this ingredient as “the ester of oleic acid and polyglycerin-4”, CAS 71012-10-7; CAS 9007-48-1 is the generic number for the polyglyceryl oleate group. PubChem (ChemIDplus record) lists the same CAS number, 71012-10-7, and the synonym tetraglyceryl monooleate. The molecule has two parts:

  • Hydrophilic head: polyglycerin-4, a chain of on average about 4 glycerin units linked by ether bonds, carrying many hydroxyl groups.
  • Hydrophobic tail: the oleate group (C18:1), attached to the hydrophilic head by an ester bond.

The “4” is an average: according to CIR, the polymerization of glycerin produces a distribution of chains of different lengths, mostly linear but also including branched and cyclic forms; the raw material may also contain traces of unreacted glycerin and fatty acid soaps. Raw materials from different suppliers may therefore differ.

Some INCI names that look similar are different substances, and their data are not interchangeable:

INCIHow it differs
Polyglyceryl-4 LaurateSame polyglycerin-4 head, C12 laurate tail; in the studies below it serves as the main, hydrophilic surfactant, paired with polyglyceryl-4 oleate
Polyglyceryl-3 Oleate, Polyglyceryl-10 OleateSame oleate tail, shorter or longer hydrophilic head; separate irritation data in the CIR report (section 6)
Polyglyceryl-4 PentaoleateFive oleate groups on one polyglycerin-4 head; according to CIR, not reported to be in use
Polyglyceryl-2 DipolyhydroxystearateEmulsifier for water-in-oil creams — see the article on polyglyceryl-2 dipolyhydroxystearate

2. Role in formulations

According to CIR, polyglyceryl esters are nonionic, and their polarity varies with the degree of polymerization of the polyglycerin and the number of fatty acids per hydrophilic head. For polyglyceryl-4 oleate, the roles supported by data are:

  • Co-emulsifier in nanoemulsions: Gan et al. (2021) describe polyglyceryl-4 laurate as the hydrophilic ingredient that helps form translucent nanoemulsions, while the lipophilic polyglyceryl-4 oleate acts synergistically, making nanoemulsions easier to form. The type of oil has a strong influence: with caprylic/capric triglyceride conditions were favorable, whereas with mineral oil and squalane translucent nanoemulsions could hardly be formed.
  • Cosurfactant in microemulsions: in the study by Sahle et al. (2012), adding polyglyceryl-4 oleate together with linoleic acid to a system based on polyglyceryl-4 laurate increased stability and significantly expanded the microemulsion region; the formulations were stable for 10 to more than 24 months.
  • In the oil phase: polyglycerol esters of oleic acid form reverse micelles in decane, and the larger the hydrophilic head, the larger the micelles (Shrestha 2010; the abstract does not mention tetraglycerol specifically).
  • Cleansing oils and balms: in formulation practice, this ingredient is often combined with a more hydrophilic emulsifier such as polyglyceryl-10 laurate so that a “PEG-free” cleansing oil turns milky on contact with water. We have not found any published study measuring polyglyceryl-4 oleate specifically in cleansing oils; the ratio must be finalized by emulsification testing with water. For how to use cleansing oils, see the article on double cleansing; for a PEG-based emulsifier system, see the article on PEG-20 glyceryl triisostearate.

HLB: the CIR report gives no HLB value for polyglyceryl-4 oleate. A figure from supplier documents must have its source clearly stated when quoted.

3. Evidence: formulation experiments, no efficacy trials of the ingredient itself

An exact-name search for “polyglyceryl-4 oleate” on PubMed (November 22, 2026) returned only 1 record; a full-text search on Europe PMC found 5 articles. There are no human trials measuring the effect of this ingredient on its own.

StudyModelRelevant results
Sahle et al., 2012Microemulsions containing ceramide AP; multilayer membranes in vitroPolyglyceryl-4 oleate (cosurfactant) and linoleic acid made the system more stable. As summarized by CIR, a microemulsion with 15% polyglyceryl-4 laurate and 15% polyglyceryl-4 oleate released and enabled penetration of 93.4% of the ceramide, compared with 73.3% for the reference cream — a result for the whole system, not for this ingredient alone
Sahle et al., 2014Ceramide NP on ex vivo human skin (Franz cells); HET-CAM testCeramide penetrated deeper from microemulsions than from a conventional cream; according to CIR, these microemulsions contained polyglyceryl-4 laurate/oleate 1:1. According to CIR, the HET-CAM test sample used polyglyceryl-4 laurate, with no mention of polyglyceryl-4 oleate; the authors judged both types of microemulsion safe for topical application based on HET-CAM, with the lecithin-based system giving better safety results
Gan et al., 2021Phase diagrams of nanoemulsions with three types of oilThe lipophilic polyglyceryl-4 oleate acts synergistically with polyglyceryl-4 laurate; glycerin helps form translucent nanoemulsions. The first author is affiliated with a cosmetics company
Lu et al., 2023Nanoemulsion containing paeonol and madecassoside; cells, 3D skin tissue, humansThe formula used 3% polyglyceryl-4 oleate in the oil phase (full text). The results on skin belong to the whole formula and its active ingredients and are not attributed to the emulsifier. Two of the nine authors are employees of a cosmetics company

Practical implication (inference): this ingredient is usually studied as part of an emulsifier pair; when changing the ratio, the oil or the supplier, retest clarity and stability.

4. Use levels

SourceContextLevel
CIR 2016, FDA voluntary registration data and industry survey7 uses, all in leave-on products (including 2 eye-area uses with no concentration stated); no rinse-off usesUp to 1.8% (leave-on, dermal contact)
FDA Inactive Ingredient Database (cited by CIR)Excipient in vaginal emulsions and creamsUp to 2.71%
Formulation studiesMicroemulsion (Sahle 2012); nanoemulsion (Lu 2023)15%; 3%

These are reported concentrations or concentrations used in studies, not recommended levels. CIR's conclusion applies to “the present practices of use and concentration described in the report”; levels above 1.8%, or use in rinse-off products such as cleansing oils, fall outside the use data for this specific ingredient in the report, so a separate safety assessment of the finished product is needed.

5. How to use and combine

  • Phase of addition: in the published formulas, this ingredient was mixed into the oil phase (Lu 2023).
  • Protection against oxidation: the oleate group has a double bond and can therefore oxidize; CIR records one raw material specification that already contains 100 ppm D,L-tocopherol. Consider adding tocopherol to the oil phase and monitoring odor, color and peroxide value during stability testing (inference from the structure).
  • pH, temperature: CIR notes that polyglyceryl esters are less stable in the presence of water at high temperatures, and even less stable in the presence of alkaline substances; acids or alkalis cause partial hydrolysis, releasing free fatty acids and polyglycerol. In water-containing products, avoid alkaline pH and prolonged heating.
  • Penetration of other ingredients: CIR notes that some polyglyceryl esters, including the polyglyceryl-4 laurate/oleate pair in the ceramide microemulsion, may increase the penetration of other ingredients; this should be considered when combining them with ingredients whose safety assessment relies on low dermal absorption.

6. Safety

CIR: the final report (November 14, 2016; published in a journal in 2023) assessed 274 polyglyceryl esters, with Polyglyceryl-4 Oleate named in the list covered by the conclusion, and concluded that these ingredients are safe in the present practices of use and concentration described in the report when formulated to be non-irritating. The Panel relied in part on the fact that these ingredients are metabolized to glycerin and fatty acids — nutrients and physiological intermediates.

Ingredient-specific data: the report contains no skin irritation, eye irritation or sensitization tests for polyglyceryl-4 oleate itself. Data for ingredients with the same oleate tail are for reference only:

  • Polyglyceryl-3 oleate: moderate skin irritation and mild eye irritation in rabbits (unpublished data, concentration not stated).
  • Polyglyceryl-10 oleate at 5% in water, under a 24-hour occlusive patch on 35 people: non-irritating.
  • In the case of contact allergy to polyglyceryl laurate (Washizaki 2008, as summarized by CIR), the patient tested negative to polyglyceryl-10 oleate at 0.1–1%.

Contact allergy: a PubMed search (November 22, 2026) found no case reports of allergy to polyglyceryl-4 oleate; this does not rule out the possibility of allergy.

Comedogenicity: we have not seen published data for this ingredient.

Pregnancy, breastfeeding: data are insufficient; consult a doctor.

7. Notes for brand owners

ASEAN regulations: Polyglyceryl-4 Oleate is not listed in Annexes II, III, VI (version 2026-1 of June 22, 2026) or VII (version 2025-2) of the ASEAN Cosmetic Directive — searched by INCI name, “polyglycer”, “oleat”, “oleic” and CAS 71012-10-7, 9007-48-1.

  • Quality: request a certificate of analysis (COA) for each lot and information on the antioxidant it contains; keep the same supplier once stability testing has been done.
  • “PEG-free”: true for this ingredient, because the hydrophilic part is polyglycerin, usually made by condensing glycerin (CIR), with no polyethylene glycol segment. Label a product “PEG-free” only when the whole formula contains no PEG ingredients; do not imply that products containing PEG are less safe.
  • Avoid: “plant-derived” or “natural” without supplier documentation for the specific lot; “non-irritating” or “does not sting the eyes” without testing on the finished product; attributing skin-conditioning effects to the emulsifier itself.

Butter-C can use polyglyceryl-4 oleate in some PEG-free formulas, such as an olive oil cleansing oil combined with polyglyceryl-10 laurate; the ratio is finalized through emulsification testing with water, oxidative stability testing and safety assessment of the finished product.

Frequently asked questions

Is polyglyceryl-4 oleate a PEG?

No. The hydrophilic part is polyglycerin (polymerized glycerin), not polyethylene glycol. “PEG-free” does not mean milder; mildness must be tested on the finished product.

Is this ingredient safe?

CIR concluded that the polyglyceryl ester group, including this ingredient, is safe in the practices of use and concentrations surveyed when formulated to be non-irritating. No irritation or sensitization tests have been published for this ingredient itself.

Does polyglyceryl-4 oleate cause acne?

There are no published comedogenicity data for this ingredient, so no conclusion can be drawn either way.

Can it be used during pregnancy?

There are insufficient human data; consult a doctor.

References

  1. PubChem. Polyglyceryl-4 oleate, Substance SID 135322933 (ChemIDplus). https://pubchem.ncbi.nlm.nih.gov/substance/135322933
  2. Fiume MM et al. Safety Assessment of Polyglyceryl Fatty Acid Esters as Used in Cosmetics. Int J Toxicol. 2023. PMID 37279183. Full text of the CIR final report (November 14, 2016): https://www.cir-safety.org/sites/default/files/PGlyFE092016FR.pdf
  3. Sahle FF et al. Polyglycerol fatty acid ester surfactant-based microemulsions for targeted delivery of ceramide AP into the stratum corneum: formulation, characterisation, in vitro release and penetration investigation. Eur J Pharm Biopharm. 2012. PMID 22691416
  4. Sahle FF et al. Controlled penetration of ceramides into and across the stratum corneum using various types of microemulsions and formulation associated toxicity studies. Eur J Pharm Biopharm. 2014. PMID 23896195
  5. Gan L et al. Phase Behavior of Polyglycerol Ester-Based Nanoemulsions. J Nanosci Nanotechnol. 2021. PMID 34229820
  6. Lu W et al. Systematic Study of Paeonol/Madecassoside Co-Delivery Nanoemulsion Transdermal Delivery System for Enhancing Barrier Repair and Anti-Inflammatory Efficacy. Molecules. 2023. PMID 37446936
  7. Shrestha LK et al. Structure of polyglycerol oleic acid ester nonionic surfactant reverse micelles in decane: growth control by headgroup size. Langmuir. 2010. PMID 20180589
  8. Washizaki K et al. A case of allergic contact dermatitis to polyglyceryl laurate. Contact Dermatitis. 2008. PMID 18279173

Get started

Talk to us about the product you plan to launch

Please send us your product direction and expected quantities. Our team will get back to you during business hours.

Công ty cổ phần Dược mỹ phẩm Butter-C · Business registration no. 0108681386 (Hanoi Department of Planning and Investment, 03/04/2019)
Head office: Huu Le village, Dai Thanh commune, Hanoi · Factory: Thanh Oai Industrial Cluster, Binh Minh commune, Hanoi, Vietnam
Hotline 0967 176 511 · [email protected] · privacy policy
Product catalog →